Bedienungsanleitung Leica S2 (Seite 40 von 89) (Englisch)

585257

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

36 / Exposure compensation / Entering and cancelling an exposure compensation

3. Confirm the setting by pressing the click wheel.

• The setting for Interval is marked as ready for editing. The

corresponding number of red arrows appears above the

scale. They specify the relevant exposure values.

4. Set the desired graduation by turning the click wheel (20).

• The arrows change their positions according to the set gra-

duation.

Notes:

• If the bracketing exceeds the range of ± 3 EV due to the com-

bination of number of pictures and graduation, the scale divi-

sion changes from ±3 EV to ±6 EV. The arrows move accordingly.

• Note that both settings have to be made and confirmed,

otherwise the function will not be active.

5. Confirm the setting by pressing the click wheel.

• A set bracketing series is indicated by XEV /X

in the initial

menu list.

The viewfinder shows

– the corresponding warning symbol (2.2).

– the changing displays for shutter speed (2.8) and aperture

(2.6) depending on the graduations

The top panel display shows

– next to the exposure mode + before over exposed pictures

(3.8), 0 before the uncorrected picture, and – before under

exposed pictures

– the display for a bracketing series (3.9b)

Example, first „X“ stands for the graduation, the second for the number of

pictures

Notes:

• Depending on the exposure mode (see „Exposure control“

section on p. 37) the exposure graduations are produced by

changing the shutter speeds and/or apertures.

• The sequence of the exposures is: overexposure, correct

exposure, underexposure.

• When using automatic bracketing, all AUTO ISO settings (see

p. 30) are preset:

- The sensitivity automatically determined by the camera for

the uncorrected picture is also used for all other pictures in

a series, i.e. this ISO value is not changed during a series.

- The settings in the AUTO ISO submenus have no effect, i.e.

the camera's full shutter speed range is available.

• Depending on the initial exposure setting, the working range for

automatic bracketing may be limited.

• Regardless of this, the specified number of pictures is always

taken, which may mean that several pictures in a series have

the same exposure at the end of the working range.

• The function remains active until it is deactivated in the menu

or the camera is turned off.

Values above and below the metering range

If the camera’s metering range is not reached, accurate expo-

sure metering is not possible. Any values that are then shown in

the viewfinder can lead to incorrect exposure results. For this

reason, if the metering range is not reached, (2.8b) always

appears in the viewfinder.

Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 36

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S2 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info