Bedienungsanleitung Lenco LED-4353 (Seite 53 von 231) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Spanisch)

793267

Zoom out

Zoom in

Vorherige Seite

1/231

Nächste Seite

English - 14 -

Settings

You can access the Settings menu from the Home

Screen or from the TV options menu in Live TV mode.

Network & Internet



the options of this menu. You can also highlight the

Connected/Not Connected icon on the Home screen

and press OK to access this menu.

Wi-Fi: Turn the wireless LAN (WLAN) function on

󰀨

Available networks

When the WLAN function is turned on, available

wireless networks will be listed. Highlight See all and

press OK to see all networks. Select one and press OK

to connect. You may be asked to enter a password to

connect to the selected network, in case the network

is password protected. Additionally you can add new

networks by using the related options.

Other options

Add new network: Add networks with hidden SSID’s.

Scanning always available: You can let the location

service and other apps scan for networks, even when

󰀨OK to turn it on

󰀨

Wow:󰀨

you to turn on or awaken your TV via wireless network.

Wol:󰀨

you to turn on or awaken your TV via network.

Ethernet

Connected/Not connected: Displays the status of

the internet connection via Ethernet, IP and MAC

addresses.

Proxy settings: Set a HTTP proxy for browser manu-

ally. This proxy may not be used by other apps.

IP settings:

Channel

Channels

Options of this menu may change or become inac-

tive depending on the Channel Installation Mode

selection.

Channel Installation Mode - Antenna

Automatic Channel Search: Start a scan for analogue

and digital channels. You can press the Back button to

cancel the scan. The channels that have already been

found will be stored in the channel list.

Update Scan: Search for updates. Previously added

channels will not be deleted, but any newly found

channels will be stored in the channel list.

Analogue Manual Scan: Start a manual scan for

analogue channels. Enter the Start Frequency and

then select Scan Up or Scan Down. When a channel

is found the scan will be completed and the found

channel will be stored in the channel list.

Single RF Scan: Select the RF Channel by using

the Right/Left directional buttons. Signal Level and

Signal Quality of the selected channel will be shown.

Press OK to start scan on the selected RF channel.

The found channels will be stored in the channel list.

Manual Service Update: Start a service update

manually.

LCN: Set your preference for LCN. LCN is the Logical

Channel Number system that organizes available

broadcasts in accordance with a recognizable channel

number sequence (if available).

Channel Scan Type: Set your scan type preference.

Channel Store Type: Set your store type preference.

Favourite Network Select: Select your favourite

network. This menu option will be active, if more than

one network is available.

Channel Skip: Set channels to be skipped when

switching the channels via Programme +/- buttons

on the remote. Highlight the desired channel/s on the

list and press OK to select/unselect.

Channel Swap: Replace the positions of the two

selected channels in the channel list. Highlight the

desired channels on the list and press OK to select.

When the second channel is selected, the position of

this channel will be replaced with the position of the

LCN option

to 󰀨 or Default in order to enable this feature.

Channel Move: Move a channel to the position of

another channel. Highlight the channel you want to

move and press OK to select. Then do the same for a

second channel. When the second channel is selected,



of that channel. You should set the LCN option to 󰀨

or Default in order to enable this feature.

Channel Edit: Edit channels in the channel list. Edit the

name and channel number of the selected channel and

display Network Name, Frequency, Colour System

and Sound System information related to that channel

if available. Depending on the channel other options

may also be editable. You can press the Blue button

to delete the highlighted channel.

Analogue Channel Fine-tune: Fine-tune an analogue

channel. A list of available analogue channels will be

displayed. Select the desired one from the list and

press OK button. Then change the frequency of the

channel by pressing Left/Right directional buttons.

Lenco LED-4353 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info