Bedienungsanleitung Lenco PDR-035 (Seite 7 von 66) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

792974

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

Displaying DAB + Station Information

There are several types of information as listed below. To change the display information, press the INFO/MENU repeatedly.

1. Radio Text scrolling

Shows music titles or program details provided by the selected radio station.

2. Signal Bar

Transmission signal level. The more the rectangles are filled, the stronger the signal is received. The unfilled rectangle is the

threshold level where the signal strength received should exceed this threshold. To improve the reception, adjust the antenna

position.

3. Program Type (PTY)

Type of program provided by the radio station

4. Multiplex Name

Displays name of multiplex to which the current station belongs

5. Frequency

Current channel number and frequency

6. Signal Error Rate

Shows the error rate. The larger this value, the more errors it receives. To improve the reception, adjust the antenna position.

7. Audio Bit Rate

This is the current channel audio Bitrate

8. Time

Displays the current time provided by the radio station

9. Date

Displays the current date provided by the radio station

OTHER DAB + MENU OPERATIONS

Press and hold the INFO/MENU button to access the menu control. Then rotate the ENTER knob (or press the or button) for

different options as described below.

Prune Invalid

This function removes inactive stations.

1. Press and hold the INFO/MENU button to access the menu control.

2. Rotate the ENTER knob (or press the or button) until the “Prune Invalid” is selected and then press the ENTER knob.

3. Rotate the ENTER knob (or press the or button) to select “Yes”.

4. Press the ENTER knob to confirm.

5. To quit the menu control, press the BACK button repeatedly.

Dynamic Range Control (DRC)

DRC can make quieter sounds easier to hear when the unit is used in a noisy environment. The DRC level of a broadcast is set by the

selected radio channel and transmitted with the service. Changing the DRC value on your unit enables you to apply a scaling factor to

this level.

There are three levels of compression:

DRC high:

Maximum compression as sent with the transmitted service

DRC low:

Set to 1/2 that of the sent transmitted service

DRC off:

No compression

1. Press and hold the INFO/MENU button to access the menu control.

2. Rotate the ENTER knob (or press the or button) until the “DRC” is selected and then press the ENTER knob.

3. Rotate the ENTER knob (or press the or button) to select “High”, “Low” or “Off”.

4. Press the ENTER knob to confirm.

5. To quit the menu control, press the BACK button repeatedly.

Note:

- Not all DAB + radio stations are able to use DRC function. If the station does not support DRC then the DRC setting will have no

effect.

- After you have adjusted the DRC level the sound may be louder.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco PDR-035 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info