Bedienungsanleitung Lenco PDR-035 (Seite 8 von 66) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

792974

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

FM RADIO OPERATION

Station Scanning

1. Turn on the unit in FM mode.

2. Press the or button repeatedly to manually tune to a different frequency.

3. Or press and hold the or button to automatically search to the next available channel.

Storing FM Presets

You can save up to 20 FM presets.

1. Tune to the station you wish to store.

2. To save it to the preset channel 1 or 2 or 3, press and hold the prefered preset number. Then it will save to that preset channel.

3. To save it to other preset channel from 4 to 20, press and hold the numeric button “4”. A preset channel list will be displayed.

4. Rotate the ENTER knob (or press the or button) to select the desired preset channel to save.

5. Press the ENTER knob to save.

Recall Stored FM Presets

1. To recall the preset channel 1 or 2 or 3, press the numeric button respectively. Then it will tune to that preset channel.

2. To recall other preset channel from 4 to 20, press the numeric button “4”. The preset channel list will be displayed.

3. Rotate the ENTER knob (or press the or button) to select the desired preset channel to recall.

4. Press the ENTER knob to recall.

Stereo/Force Mono Selection

When receiving a Stereo FM radio channel, pressing the ENTER knob will switch between stereo audio and force mono audio.

Note:

- The telescopic antenna at the rear panel of the unit should be fully extended to ensure a good reception. Alter the antenna

position for the best reception.

Displaying FM Station Information

There are several types of information as listed below. To change the display information, press the INFO/MENU repeatedly.

1. Radio Text

Scrolling text which shows information on music titles or program details provided by the radio station

2. Program Type (PTY)

Type of program provided by the broadcaster

3. Frequency

Current channel frequency

4. Audio Type

Stereo or Mono

5. Battery Level

100 is maximum

6. Date

Displays the current date provided by the radio station

OTHER FM MENU OPERATIONS

Press and hold the INFO/MENU button to access the menu control. Then rotate the ENTER knob (or press the or button) for

different options as described below.

Scan Setting

1. Press and hold the INFO/MENU button to access the menu control.

2. Rotate the ENTER knob (or press the or button) until the “Scan Setting” is selected and then press the ENTER knob.

3. Rotate the ENTER knob (or press the or button) to select “Strong Stations Only” or “All Stations” and then press the

ENTER knob confirm. When the “Strong Stations Only” is selected, only the strong stations are detected. Scanning will ignore the

noisy stations. When “All Stations” is selected, all stations will be detected during FM scanning even if the radio station is noisy.

4. The next time doing the FM scan the unit will search for the stations based on this confirmed setting.

5. To quit the menu control, press the BACK button repeatedly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco PDR-035 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info