694789
8
Zoom out
Zoom in
Vorherige Seite
1/58
Nächste Seite
8
System settings
The System settings allow you to tailor the radio with a variety of options to suit you. To access system settings from any
mode Select Menu > System >, then choose from the various options as described in the menu map.
The System Setting Menu options are:
Sleep
Alarm
Equaliser
Time
Backlight
Language
Factory Reset
Software upgrade
Software version
To navigate through the menus
The following controls are used to move about the menu tree to choose and select the required settings: Select (Turn to
cycle SKIP- or SKIP+) this selects the currently displayed option, if the option has a further sub-menu the first option of the
sub-menu is displayed. If the option is a setting value, the displayed value is selected and either the next setting is
highlighted or, if there are no further settings, the display returns to the parent menu for that setting.
Note: current or default values are indicated by an asterisk (*) on the right-hand side of the top line of the character display.
SKIP+/SKIP- button control cycles forwards and backwards through the current menu or setting options.
Back jumps back to the parent menu of the currently displayed menu or setting.
Time
The time and date can be updated manually or automatically. With auto-update, the time and date are automatically
synchronised with national time signals broadcast over DAB and FM (when available). You can also select the display format
for the time and date.
The Time menu contains the following options:
Set Time/Date - (see below)
Auto update - Update from Any | Update from DAB | Update from FM | No Update
Set 12/24 hour - 12 | 24
Set date format - dd-mm-yyyy | mm-dd-yyyy.
Set time/date
This option is for manually setting the time and date displayed. The time displays as hh:mm AM/PM, with the first value, hh,
active (flashing). Adjust each value using the SKIP-/SKIP+ button control and press ENTER to confirm. The next value then
becomes active Will flash. Next you can set the date with SKIP+/SKIP- and pressing Enter. Note: The date displays as
dd-mm-yyyy or mm-dd-yyyy depending on your choice of date format
Alarms and sleep
As well as a clock/calendar, there are four wake-up alarms with snooze facility and a sleep function to turn the system off
after Configurable time (15, 30, 45, 60, 90 minutes)
The alarm sound for each alarm can use a buzzer or a selection from the audio sources.
1. Alarms
Note: Alarms will only function when the radio unit Is On (mains or battery power) or In Standby mode (Mains power only).
Attempting to enter Standby mode when powered only by battery will turn the radio unit Off.
An active alarm is indicated by its icon in the top right line of the display.
Note: Alarms can be switched on or off in standby mode (see below), however, the alarm parameters can only be set when
the radio is on.
When enter the alarm setting mode, Alarm 1’ appears on screen as default, to set or change alarm 1, press ENTER. To set or
change alarm 2, turn SKIP+ in clockwise, Alarm 2’ comes up, then press ENTER. Same way to set or change alarm 3 & alarm 4.
To exit alarm setting mode, press BACK again.
The alarm setup prompts you for the following parameters. Select a value for each parameter in Turn to cycle SKIP+ and press
ENTER to confirm and move on to the next parameter.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lenco PDR-050 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info