18
c) Multiple press the “SLEEP” button to select how many minutes the unit will play music before it will go into
standby mode: 5
10
15
30
45
60
90
120
OFF (Default is OFF.) after selecting the desired time, wait
to select automatically. The display will show ‘SLEEP’ to indicate the sleepmode is active.
d) When sleepmode is activated, you can display the sleeptime by pressing the “SLEEP” button.
e) The sleep function can be turned off by long press on the “FUNCTION” button or s electing “OFF” by pressing the
“SLEEP” button.
Remark:
1. If sleep time is ended, the unit will go to standby. when an alarm arrives at the same time as sleep ends,
sleep will terminate and alarm goes on. If sleep ends earlier then the alarm, the alarm will turn on the set; if
the alarm is earlier then the sleep ends, sleep will terminate and alarm switches on.
2. There is a one‐minute sleep countdown where the volume drops down gradually. If power on again, the unit
will return to the previous gradually drop down volume setting.
6. Alarm Setting
Follow these steps to set the alarm:
In standby mode, press and hold the MEMORY/ALARM button for 2 seconds. The alarm time will be shown on the
display and the hours will start blinking.
a) AdjustthehourtimewiththeSKIP+/SKIP‐ buttons.
b) Press the MEMORY/ALARM button again. The minutes will start to blink.
c) Adjust the minutes with the SKIP+/SKIP‐ buttons and press the MEMORY/ ALARM button. Now you can
select the desired SOURCE (BUZZER, USB or TUNER) and press the MEMORY/ALARM button to confirm the
selected source. Press the MEMORY/ALARM button again. Select to the desired SOURCE (1.BUZZER,
2.TUNER or 3.USB)
d) The weekday(s) will start to b link.
Press SKIP+/SKIP‐ buttons to select the alarm frequency a mong “DAILY”, WEEKDAYS”,“WEEKENDS”, “ONCE” and
“VOLUME”. Then press the MEMORY/ALARM button to store the setting.
Remark:
1. When no buttons are pressed within 10 seconds, during alarm setting, the unit will exit the alarm setting mode
without storing changes.
2. Alarm1 time Default is 0:00
3. WEEKENDS: The alarm is activated only on weekends
4. WEEKDAYS: The alarm is activated only on weekdays
5. ONE DAY: The alarm is activated only on that day
6. DAILY: The alarm is activated everyday
Alarm On/Off:
If no alarm is active, press the MEMORY/ALARM button t o m ake the ALARM active. The corresponding alarm icon
will show on the display. (You can only do this when the unit is in standby mode). Pressing the MEMORY/ALARM
button again will turn the alarm off and the alarm icon on the display will disappear.
