Bedienungsanleitung Lenco SR-03 BT (Seite 6 von 37) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

601657

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

7. To interrupt playback, press the ►/II button again or select “pause” on your phone.

8. To skip forward or back to other songs during playback, press the▶ ▶I or I◀ ◀button on the unit or

select the “skip controls” on your mobile phone.

Note: Some mobile phones may connect and disconnect as you make and end calls. This is not an

Indication of a problem with your unit.

Stereo music connection to other Bluetooth devices

This connection requires a device supporting the Bluetooth A2DP profile for stereo music connection.

Please ensure your device has the latest versions of software drivers and/or firmware supporting

Bluetooth functionality. Compatibility with all devices is not guaranteed. In addition to the procedures

described above for mobile phones, this radio can receive stereo music from many other Bluetooth source

devices including personal computers, PDAs, Bluetooth enabled music players. The exact connection

procedures may vary from device to device, please refer to the device user manual for specific

operations.

Note : An increasing number of computing devices include support for Bluetooth, and many include

support for stereo music over Bluetooth (A2DP). For best performance from your particular device,

please ensure that you are using the latest update of software drivers and/or firmware available. In

certain circumstances, updating the software drivers or firmware of your device to the latest release

May add support for A2DP that was not available in a previous release. Please contact the vendor of

your device for such updates and refer to the device user manual for update procedures. Please

remember that system updates should only be performed by qualified individuals after performing a

full system backup.

LISTENING TO THE USB (MP3 Playback)

1. When the radio is on, repeatedly press the MODE button to select USB function, the display will show

“USB” and “NO DATA”. (F. 14)

2. Connect your memory device loaded with your favourite MP3 songs via the USB port located on the

back panel. The “NO DATA” will then go off.

3. It will begin to playback automatically from the first MP3 track found in the device and the display

willshow the USB playback icon. (F. 15)

4. To interrupt playback, press the ►/II button, the playback icon in the display will flash.

5. To resume playback, press the ►/II button again.

6. During playback, press the ▶▶I or I◀◀ button to skip forward or back to other MP3 tracks in the

memory device. Playback will start at the beginning of the selected track.

Note 1: In case that your memory device is loaded with MP3 songs but the display keeps on showing 'NO

DATA”, the format of your USB device might not be compatible with this radio. To listen to the

songs in the device, please use the line-in cable (not supplied), insert one end to the AUX IN

socket (at the back of the radio) and the other end to the line out or the headphone jack of your

USB device, then repeatedly press the MODE button to select AUX mode.

Note 2: This product can support USB of memory size up to 16GB, only that the acknowledge time for

bigger memory will be longer, and in some occasions will cause system time out. So to be

compatible to all USB device cannot be guaranteed, this is not an indication of a problem with this

unit.

SLEEP FUNCTION

This function allows you to program the radio to switch off itself after a set period of time.

1. To activate the sleep function, repeatedly press the SLEEP button, the display will show “SLEEP”,

and the sleep time (flashes in minutes) will change in sequence on every press:

2. When your desired sleep time appears in the display, release the button, the sleep function will be

activated in 5 seconds. When the sleep time counts to zero, the unit will go off.

3. To put the sleep function off sooner, repeatedly press the SLEEP button until the display shows

“OFF”, and the “SLEEP” will then be disappeared. “OFF”, and the “SLEEP” will then be disappeared.

90 8 0 7 0 60 30 1 0

OFF

UK-5

NO DATA

USB

F.14 F.15

USB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco SR-03 BT Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info