Bedienungsanleitung Lenovo ThinkPad 8 (Seite 40 von 74) (Englisch)

572948

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

– To perform a quick format, tap Just remove my ﬁles to start the process. The process will take

several minutes.

– To perform a complete format, tap Fully clean the drive to start the process. The process will

take several hours.

7. Follow the instructions on the screen to reset your tablet to the factory default settings.

• Using a USB recovery key provided by Lenovo:

To obtain a USB recovery key, contact the Lenovo Support center. Shipping and handling

fees apply. For a list of the Lenovo Support phone numbers for your country or region, go to

http://www.lenovo.com/support/phone or refer to the Safety, Warranty, and Setup Guide that comes with

your computer.

Note: Use a USB recovery key to reset your tablet to the factory default settings only when the recovery

application fails to reset your tablet.

1. Fully charge your tablet to ensure that there will be no power interruption during the recovery process.

For instructions on how to check the battery status, refer to “Checking the battery status” on page 20.

2. Turn off the tablet, wait for about ﬁve seconds, and then connect the USB recovery key to the micro

USB 3.0 connector of your tablet by using the ThinkPad Micro USB 3.0 to USB 3.0 cable.

Note: The ThinkPad Micro USB 3.0 to USB 3.0 cable is provided for some tablet models.

If you do not ﬁnd such a cable in your product package, you can purchase it from

http://www.lenovo.com/essentials.

3. Press and hold the power button together with the volume-up button at the same time to enter

the ThinkPad Setup program.

4. Tap Startup. On the Boot submenu, drag USB CD/DVD: upward until USB CD/DVD: is shown

as the ﬁrst startup device.

5. Tap Save, and then tap Yes to save your conﬁguration.

6. Tap Restart and follow the on-screen instructions to restart the tablet. After the tablet restarts, the

recovery program opens automatically.

7. Select the language you prefer in the drop-down list box and click Next.

8. Follow the on-screen instructions to reset your tablet to the factory default settings.

Using the advanced startup options

With the advanced startup options, you can change the ﬁrmware settings of the tablet, change the startup

settings of the Windows operating system, start the tablet from an external device, or restore the Windows

operating system from a system image.

To use the advanced startup options, do the following:

1. Swipe in from the right edge of the screen to display the charms.

2. Tap Settings ➙ Change PC settings.

3. In the navigation panel, tap Update and recovery ➙ Recovery.

4. In the Advanced startup section, tap Restart now ➙ Troubleshoot ➙ Advanced options.

5. Select a desired startup option, then follow the instructions on the screen.

Recovering your operating system if Windows 8.1 fails to start

The Windows recovery environment on your tablet is capable of operating independently from the Windows

8.1 operating system. This enables you to recover or repair the operating system even if the Windows 8.1

operating system fails to start.

32 User Guide

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenovo ThinkPad 8 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenovo ThinkPad 8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info