Bedienungsanleitung Lenovo ThinkPad 8 (Seite 41 von 74) (Englisch)

572948

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

After two consecutive failed boot attempts, the Windows recovery environment starts automatically. Then

you can choose repair and recovery options by following the instructions on the screen.

Note: Ensure that your tablet is connected to ac power during the recovery process.

Creating and using recovery media

You can create recovery media as backups for the Windows recovery environment and the Windows

recovery image. If you cannot start the tablet, you can use recovery media to troubleshoot and ﬁx the

problems on your tablet.

It is recommended that you create recovery media as early as possible. Once you create recovery media,

keep them in a safe place and do not use them to store other data.

Creating recovery media

To create recovery media, you need a USB key with at least 16 GB of storage. The required USB capacity

depends on the size of the recovery image.

Attention: Creating recovery media will delete anything stored on the USB key. To avoid data loss, make a

backup copy of all the data that you want to keep.

To create recovery media, do the following:

Note: Fully charge your tablet to ensure that there will be no power interruption during the recovery process.

For instructions on how to check the battery status, refer to “Checking the battery status” on page 20.

1. Swipe in from the right edge of the screen to display the charms.

2. Tap the Search charm.

3. Type recovery in the Search ﬁeld. Then tap Create a recovery drive.

4. Tap Yes in the User Account Control window to allow the Recovery Media Creator program to start.

5. Ensure that you select the Copy the recovery partition from the PC to the recovery drive. option.

Then tap Next.

Important: If you clear the Copy the recovery partition from the PC to the recovery drive. option,

you will create recovery media without the recovery partition content. You still can start the tablet

from the recovery media, but you might be unable to recover your tablet if the recovery partition on

your tablet is damaged.

6. Connect a proper USB key, then tap Next.

7. Tap Create in the Recovery Drive window. The creation of the recovery media starts.

8. When the creation of the recovery media ﬁnishes, do one of the following:

• To keep the recovery partition on your tablet, tap Finish.

• To delete the recovery partition on your tablet, tap Delete the recovery partition.

Attention: If you delete the recovery partition on your tablet, do keep the recovery media in a safe

place. The Windows recovery image will not be stored in your tablet anymore, and you will need the

recovery media to refresh or reset your tablet.

9. Remove the USB key. The recovery media are created successfully.

Using recovery media

If you cannot start your tablet, or if you cannot start the Windows recovery image on your tablet, use

recovery media to recover your tablet.

Chapter 5. Recovery overview 33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenovo ThinkPad 8 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenovo ThinkPad 8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info