Bedienungsanleitung Levita CS35 2x20V (Seite 42 von 80) (Deutsch, Englisch)

765518

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

OPERATION

Adding the chain lubricating oil

WARNING

Never work without chain lubricant. If the saw

chain is running without lubricant, the guide bar

and the saw chain can be damaged. It is essential to

frequently check the oil level in the oil level gauge

and before starting to use the chain saw.

Keep the reservoir more than ¼ full to ensure suﬃcient oil

is available for the job.

Note: It is recommended to use a vegetable based chain

oil when pruning trees. Mineral oil may harm trees. Never

use waste oil automotive oil, or very thick oils. These

could damage the chain saw. Clear surface around the oil

cap to prevent contamination.

Holding the chain saw

Always hold the chain saw with your right hand on the

rear handle and your left hand on the front handle. Grip

both handles with the thumbs and ﬁngers encircling the

handles.

Starting the chain saw

Before starting the chain saw, you should install the

battery pack in the chain saw and make sure the chain

brake is in run position by pulling the chain brake lever/

hand guard toward the front handle.

Checking and operating the chain

brake

Activate the chain brake by holding the front handle

with your left hand. Press the chain brake lever/hand

protection towards the guide rail with the back of your

hand, while the chain is moving fast. Please ensure that

both your hands are on the handles at all times.

Reset the chain brake back into the run position by

grasping the top of the chain brake lever/hand guard and

pulling toward the front handle until you hear a click.

WARNING

If the chain brake does not stop the chain

immediately, or if the chain brake will not stay in

the run position without assistance, bring the chain

saw to an service station for repair prior to use.

TRANSPORTATION AND STORAGE

Always lightly oil the chain when storing to prevent rust. Always empty the oil tank when storing to prevent leakage.

Stop the machine, remove the battery, and allow it to cool before storing or transporting.

Clean all foreign materials from the machine. Store the machine in a cool, dry, and well-ventilated place that is

inaccessible to children. Keep away from corrosive agents, such as garden chemicals and de-icing salts. Do not store

outdoors.

Fit the guide bar cover before storing the machine or during transportation.

For transportation in vehicles, secure the machine against movement or falling to prevent injury to persons or damage

to the machine.

CAUTION

Hearing damage

A longer stay in the immediate vicinity of the

running unit may cause hearing damage. Wear ear

protectors.

When working with the device, a certain level of noise

cannot be avoided. Noisy work should be scheduled

for hours, during which it is allowed by statute or other

local regulations. Adhere to any applicable rest times

and limit your working time to the necessary minimum

time. For your personal protection and the protection

of people nearby, suitable hearing protection must be

worn.

Please observe the following: according to the German

Machine Noise Protection Regulation from September

2002, this device may not be operated on Sundays

and Bank holidays or working days from 8pm to 7am.

Furthermore, it is forbidden to operate the machine at the

following times of day: from 7 a.m. to 9 a.m., from 1 p.m.

to 3 p.m. and from 5 p.m. to 8 p.m.

Please do also consider any local regulations concerning

noise protection!

DANGER

Warning This power tool generates an

electromagnetic ﬁeld during operation. Under

certain circumstances, this ﬁeld may aﬀect active

or passive medical implants. To reduce the risk

of serious or fatal injury, we recommend that

individuals with medical implants consult your

physician and the manufacturer of the medical

implant before operating the machine.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Levita CS35 2x20V Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info