Bedienungsanleitung Levita CS35 2x20V (Seite 41 von 80) (Deutsch, Englisch)

765518

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

WARNING

If the machine is dropped, suﬀers heavy impact or

begins to vibrate abnormally, immediately stop

the machine and inspect for damage or identify

the cause of the vibration. Any damage should be

properly repaired or replaced by an service station.

Residual Risk

Even when the product is used as prescribed, it is still

impossible to completely eliminate certain residual

risk factors. The following hazards may arise in use and

the operator should pay special attention to avoid the

following:

• Injury caused by vibration

Always use the right tool for the job. Use designated

handles. Restrict working time and exposure.

• Damage to hearing due to exposure to noise

Wear hearing protection and limit exposure.

• Injury caused by contact with exposed saw teeth of the

chain

• Injury caused by thrown-out pieces of the workpiece

(wood chips, splinters)

• Injury caused by dust and particles

• Injury to the skin caused by contact with lubricants

• Parts ejected from the saw chain (cutting/injection

hazards)

• Unforeseen, abrupt movement, or kickback of the guide

bar (cutting hazards)“

Risk Reduction

• It has been reported that vibrations from handheld

tools may contribute to a condition called Raynaud’s

Syndrome in certain individuals. Symptoms may inclu-

de tingling, numbness, and blanching of the ﬁngers,

usually apparent upon exposure to cold. Hereditary

factors, exposure to cold and dampness, diet, smoking

and work practices are all thought to contribute to the

development of these symptoms. There are measures

that can be taken by the operator to possibly reduce

the eﬀects of vibration:

• Keep your body warm in cold weather. When operating

the unit wear gloves to keep the hands and wrists

warm.

• After each period of operation, exercise to increase

blood circulation.

• Take frequent work breaks. Limit the amount of expo-

sure per day.

• Protective gloves available from professional chain saw

retailers are designed speciﬁcally for chain saw use

which give protection, good grip and also reduce the

eﬀect of handle vibration. These gloves should comply

with EN 381-7 and must be CE marked.

If you experience any of the symptoms of this condition,

immediately discontinue use and see your doctor.

WARNING

Injuries may be caused, or aggravated, by

prolonged use of a tool. When using any tool for

prolonged periods, ensure you take regular breaks.

ASSEMBLY

Assembling saw chain and guide bar

WARNING

If any parts are damaged or missing do not operate

the machine until the parts are replaced. Failure to

heed this warning could result in serious personal

injury.

Make sure to remove the battery. Wear protective gloves.

WARNING

The saw chain is sharp. Always wear protective

gloves when performing maintenance to the chain.

Adjusting the chain tension (See page 3)

Remove the battery pack before you do any work on the

chain saw.

To increase the chain tension, turn the chain tensioning

screw clockwise and check the chain tension frequently.

To reduce the chain tension, turn the chain tensioning

screw counterclockwise and check the chain tension

frequently.

and measure the distance between the bar and the teeth

of the chain cutters. Tighten the bar mounting nuts (Fig.

4) by turning it clockwise.

Note Do not over-tension the chain - excess tension will

cause excessive wear and will reduce the life of the chain

and could damage the bar. New chains could stretch

and loosen during initial use. Remove battery pack and

check chain tension frequently during the ﬁrst two hours

of use. The temperature of the chain increases during

normal operation causing the chain to stretch. Check the

chain tension frequently and adjust as required. A chain

tensioned while warm may be too tight upon cooling.

Make sure that the chain tension is correctly adjusted as

speciﬁed in these instructions.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Levita CS35 2x20V Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info