20464
94
Zoom out
Zoom in
Vorherige Seite
1/145
Nächste Seite
Solving print quality problems
94
Troubleshooting
Print too light Color Saver in the Quality Menu
in Settings could be set to On.
Set Color Saver to Off.
The Toner Darkness setting in the
Quality Menu in Settings is too
light, the RGB Brightness setting is
too bright, or the RGB Contrast is
too high.
Select a different Toner Darkness, RGB Brightness, or
RGB Contrast setting from the printer driver before
sending the job to print, or return the color settings to
the factory defaults.
The media being used does not
meet the printer specifications.
Make sure the media loaded in the source is not damp.
Load media from a new package. Avoid textured
media with rough finishes.
The toner cartridges are low on
toner.
The toner cartridges are defective.
Replace the toner cartridges.
Print too dark The Toner Darkness setting in the
Quality Menu in Settings is too
dark, the RGB Brightness setting is
too dark, or the RGB Contrast is too
low.
Select a different Toner Darkness, RGB Brightness, or
RGB Contrast setting from the printer driver before
sending the job to print, or return the color settings to
the factory defaults.
The toner cartridges are defective. Replace the toner cartridges.
Transparency print quality
is poor.
(Print has inappropriate
light or dark spots, toner is
smeared, horizontal or
vertical light bands
appear, or color does not
project.)
The transparencies being used do
not meet the printer specifications.
The Paper Type setting for the tray
being used is set to something
other than Transparency.
Avoid getting fingerprints on the transparencies.
Use only transparencies recommended by the printer
manufacturer.
Make sure the Paper Type setting in the Paper Menu
is set to Transparency.
Toner specks The toner cartridges are defective. Replace the toner cartridges.
Toner is in the media path. Call for customer support.
Toner rubs off the paper
easily when the sheets
are handled.
A specialty media is being used. Make sure the correct Media Type is selected.
The Paper Weight setting in the
Paper Menu is wrong for the type of
paper or specialty media being
used.
Change Paper Weight from Normal to Heavy. If
necessary, change Paper Texture from Normal to
Rough.
The fuser is worn or defective. Replace the fuser.
Gray background The Toner Darkness setting in the
Quality Menu in Settings is too
dark.
The toner cartridges are defective.
Select a different Toner Darkness setting from the
printer driver before sending the job to print.
Remove and reinstall the toner cartridges.
Replace the toner cartridges.
Symptom Cause Solution
ABCDE
ABCDE
ABCDE
94

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lexmark C522 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Lexmark C522

Lexmark C522 Bedienungsanleitung - Holländisch - 35 seiten

Lexmark C522 Bedienungsanleitung - Spanisch - 152 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info