20464
95
Zoom out
Zoom in
Vorherige Seite
1/145
Nächste Seite
Solving print quality problems
95
Troubleshooting
Uneven print density The toner cartridges are defective. Replace the toner cartridges.
The photoconductor units are
defective.
Replace the photoconductor units.
Ghost images The photoconductor units are not
functioning properly.
Make sure the Paper Type setting is correct for the
paper or specialty media being used.
Replace the photoconductor units.
See Repeating defects.
Call for customer support.
Clipped images
(Some of the print is cut
off on the sides, top, or
bottom of the paper.)
There could be an incorrect page
size selected in the driver or
application.
Specify the correct page size in the driver or
application.
Guides in the selected tray are set
for a different size media than what
is loaded in the tray.
Move the guides in the tray to the proper positions for
the size loaded.
Incorrect margins Guides in the selected tray are set
for a different size media than what
is loaded in the tray.
Auto size sensing is set to Off, but a
different size media is loaded in a
tray. For example, if A4 size paper
is inserted into the selected tray, but
the Paper Size was not set to A4.
Move the guides in the tray to the proper positions for
the size loaded.
Skewed print
(Print is inappropriately
slanted.)
Guides in the selected tray are not
in the correct position for the media
size loaded in the tray.
Move the guides in the tray to the proper positions for
the size loaded.
Blank pages An incorrect media type is loaded in
the tray being printed from, or the
Paper Type setting does not match
the type of media loaded in the
source.
The toner cartridges are defective
or empty.
Load the correct type media for the print job, or make
sure the Paper Type setting is correct for the paper or
specialty media being used.
Replace the toner cartridges.
Solid color pages The photoconductor units are
defective.
The printer requires servicing.
Make sure all packaging is removed from the
photoconductor units. See the Setup sheet or
Replacing a photoconductor unit.
Replace the photoconductor units.
Call for customer support.
Symptom Cause Solution
ABCDE
ABCDE
ABCDE
95

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lexmark C522 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Lexmark C522

Lexmark C522 Bedienungsanleitung - Holländisch - 35 seiten

Lexmark C522 Bedienungsanleitung - Spanisch - 152 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info