20464
100
Zoom out
Zoom in
Vorherige Seite
1/145
Nächste Seite
Solving network printing problems
100
Troubleshooting
Solving network printing problems
Solving other problems
Solving color quality problems
This section helps answer some basic color-related questions and describes how some of the features provided in the
Quality Menu in Settings can be used to solve typical color problems. For more information about the Quality Menu,
including the menu selections, see the Menus and Messages Guide.
Note: Read Solving print quality problems, which provides solutions for common print quality problems,
some of which may affect the color quality of the printed output.
Problem Action
Job did not print or incorrect
characters printed.
Verify that the MarkNet N8000 Series internal print server or external print server is set
up properly and the network cable is connected.
For more details, see the drivers CD that shipped with the printer.
For Novell users:
Make sure the netware.drv file is dated October 24, 1994 or later.
Make sure the NT (no tabs) flag is included in the capture statement.
For Macintosh users:
The printer may need an optional internal print server to allow Macintosh connection.
Verify that the printer is set up correctly in Chooser.
Problem Action
I need to get updated printer
drivers or utilities.
See the drivers CD that came with the printer. It contains printer drivers and utilities.
Visit the Lexmark Web site, www.lexmark.com, for the most current printer drivers or
utilities.
I need to attach a serial cable to
the printer.
If the printer is configured with a serial port, or an optional interface card is installed,
see Installing and removing options.
The multipurpose feeder door
tilts down when the lower door is
opened.
This is an intentional protective feature to prevent damage to the printer when the
lower door is opened when the multipurpose feeder is in use.
To reposition the multipurpose feeder door:
1 Remove media from the multipurpose feeder.
2 Push the extensions back into place.
3 Close the multipurpose feeder.
4 Open the multipurpose feeder.
5 Grasp the multipurpose feeder extension, and pull it straight out until fully extended.
6 Load media into the multipurpose feeder.
I cannot find the printer escape
codes.
See the Technical Reference available on the Lexmark Web site at
www.lexmark.com.
100

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lexmark C522 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Lexmark C522

Lexmark C522 Bedienungsanleitung - Holländisch - 35 seiten

Lexmark C522 Bedienungsanleitung - Spanisch - 152 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info