Bedienungsanleitung LG VH9200 DSW (Seite 24 von 32) (Englisch, Französisch, Spanisch)

619252

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Troubleshooting Guide

If there is an abnormality in the product, check the following items first before requesting for a service

center or calling the store. A service cost will be charged if the appliance does not have any

malfunctions. Following simple actions in the user manual may solve the problem.

CHECK PLEASE PERFORM THE FOLLOWING ACTIONS

Weak or no suction

and vibration noise.

• Check if inlet or dust bin is blocked by any foreign objects or debris that

weaken the suction.

• Separate dust bin from the main body, and check if the filters are dirty.

Cleaner is not

working at all?

• Check the switch is turned on.

• Check if battery level is low.

• Check if the operation procedure is correct according to the instructions

within this manual.

Why does it suddenly

stop?

• This product has an inlet motor overheat prevention device, and it may stop

temporarily when the following cases occur.

– If it is used when dust and debris in the dust bin is full and filters are

clogged.

– If it is used with the inlet blocked

– If the product is excessively used for a long time

• When power switch is accidently touched.

Loud whirring noise

coming from the

cleaner?

• It is the sound of the motor’s high speed rotating brush and the punching

action at the tip of the nozzle. This is normal.

• If dust bin is not completely assembled, noise may occur.

Assemble dust bin correctly and completely.

Odor comes out of

the cleaner?

• It might be that there is some odor coming out of cleaner after purchasing

this unit for 3 months. It is normal if the unit is operated.

• Odors can also be caused by old dust in the dust bin and filters that has not

been cleaned for some time. Empty, clean and wash the dust bin and filters

thoroughly before reusing the appliance.

Hot air comes out,

and main body is hot?

• The air coming out of the outlet holes is a little hot because it is coming out

after cooling the motor. This is normal.

UV Sterilization

station does not work.

• Check if the power cord of Sterilization station is connected into the power

socket.

• Check if the main body is placed correctly on the station.

Cleaners can not be

charged.

• Check the switch is turned on.

It only vibrates, and

there is no suction.

• Because of the suction motor overheat prevention device, this may occur

when 1) dust bin is full, 2) filter or inlet is blocked, or 3) it is used for a long

time. Allow the unit to rest and cool for at least 40 minutes before attempting

to operate again.

– Before using it again, clean the filter and dust bin.

– If the inlet is blocked, please remove the foreign object.

Mains cord is

defective

• The defective plug should be replaced by a qualification electrician.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LG VH9200 DSW Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info