Bedienungsanleitung Liebherr EWTdf 2353 (Seite 6 von 12) (Englisch)

805429

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Door open alarm

If the door is left open for more than 60 seconds, the audible

warning signal will sound.

If the door must be opened for a lengthy period to place

items into the appliance, cancel the audible warning

signal by pressing the Alarm button.

The alarm switches back to standby when the door is shut.

Fan

The interior fan ensures a constant and even interior temperature

and a suitable climate for wine storage.

The humidity in the appliance can be increased even

further by activating the Ventilation button. This has

a particularly positive eect for long-term storage.

The increased level of humidity prevents the corks from drying out.

Setting the temperature

The temperature of both com-

partments can be set sepa-

rately.

(1) Upper compartment

(2) Lower compartment

Reducing the temperature

Press the Down button.

Increasing the temperature

Press the Up button.

- When pressing one of the buttons for the first time, the display

will start to flash.

- Pressing this button again enables you to change the temperature

setting.

- The electronic control system will switch over automatically about

5 seconds after the last time you pressed the button, and the

actual temperature will be displayed.

The temperature can be set at between +5°C and +20°C.

The following drinking temperatures are recommended for the

various types of wine.

Red wines: +14°C to +20°C

Rosé wines: +10°C to +12°C

White wines: +8°C to +12°C

Sparkling wines, Prosecco: +7°C to +9°C

Champagne: +5°C to +7°C

If you are storing wine for long periods of time, it should be stored

at a temperature of between +10°C and +12°C.

Set-up mode

In set-up mode, you can set the child lock and adjust the brightness

of the display. The child lock is designed to protect the appliance

from being switched o and the temperature setting from being

changed accidentally.

Activating the child lock

Press for 5 seconds. Display =

Display =

Temperature alarm

If the temperatures in the interior are out of the permitted range,

the audible warning signal will sound and the temperature display

will ash.

• Cancel the audible warning signal by pressing the Alarm button.

After a lengthy power failure, the temperature in the interior may

have risen to too high a level. After the power supply returns, the

fall in temperature can be watched on the display.

The temperature display will stop ashing as soon as the tem-

perature in the interior has reached the set value.

Temperature alarm after a fault in the appliance

If the appliance develops a fault, the temperature in the interior

may rise too high or fall too low. The audible warning signal will

sound and the temperature display will ash.

• Cancel the audible warning signal by pressing the Alarm button.

If the temperature displayed is too high (warm), rst check whether

the door is closed correctly.

If the temperature display continues to show a value that is too high

or too low after one hour, contact the customer service department.

If F1, F8, E1, E2, E7 or E8 appears in the display, the appliance

has suered a fault.

In this case, contact the customer service department.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr EWTdf 2353 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr EWTdf 2353

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info