Bedienungsanleitung Liebherr RBstd 528i (Seite 11 von 14) (Englisch)

804852

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

When an incandescent bulb is used:

qUse an incandescent lamp with max. 15 W and E14 socket.

qPower supply (AC) and voltage at the operating point must

comply with the details on the rating plate (see 1 Appliance

at a glance) .

When a LED is used:

qUse only the original LED lamp from the manufacturer.

The lamp can be obtained through customer service or a

specialist dealer (see 6.4 Customer service) .

WARNING

Risk of injury from LED light!

The light intensity of the LED lighting corresponds to risk group

RG 2.

If the cover is removed:

uDo not look directly into the light at close quarters through

optical lenses. Doing so may damage your eyes.

WARNING

Fire hazard from the LED light!

If different LED lights are used, there is a danger of overheating

or fire.

uUse the manufacturer's original LED light.

If the lamp is defective, exchange it as follows:

uSwitch off the appliance.

uPull out the power plug or switch

off the fuse.

uAs shown in the diagram, press

open the lamp cover on the

inside at the front, and pull it off

to the side.

uReplace the lamp.

uPut on the lamp cover again and

snap it into place.

6.4 Customer service

First check whether you can rectify the fault yourself

(see 7 Malfunctions) . If you cannot rectify the problem, contact

Customer Services. You can find the address in the enclosed

Customer Service Directory.

WARNING

Unprofessional repair!

Injuries.

uHave any repairs and action - not expressly specified -

on the appliance and mains cable carried out by service

personnel only. (see 6 Maintenance)

uA damaged mains cable may only be replaced by the manu-

facturer, the manufacturer’s Customer Service or a similarly

qualified person.

uIn the case of appliances with an IEC connector, the change

may be made by the customer.

uRead the appli-

ance designation

Fig. 15 (1)

, service

No.

Fig. 15 (2)

and

serial No.

Fig. 15 (3)

off the model plate

located inside the

appliance on the left-

hand side.

Fig. 15

uNotify the customer service, specifying the fault, appliance

designation

Fig. 15 (1)

, service No.

Fig. 15 (2)

and serial No.

Fig. 15 (3)

wThis will help us to provide you with a faster and more accu-

rate service.

uKeep the appliance closed until the customer service

arrives.

wThe food will stay cool longer.

uPull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

6.5 Energy efficiency class lighting

Lighting

Energy efficiency class1Light source

This product contains an energy efficiency class

G light source

LED

1 The appliance may contain light sources with different energy

efficiency classes. The lowest energy efficiency class is indi-

cated.

7 Malfunctions

Your appliance is designed and manufactured for a long life

span and reliable operation. If a malfunction nonetheless

occurs during operation, check whether it is due to a handling

error. In this case you will have to be charged for the costs

incurred, even during the warranty period. You may be able to

rectify the following faults yourself:

Appliance does not work.

→The appliance is not switched on.

uSwitching on the appliance.

→The power plug is not properly inserted in the wall socket.

uCheck power plug.

→The fuse of the wall socket is not in order.

uCheck fuse.

The compressor runs for a long time.

→The compressor switches to a low speed when little cold is

needed. Although the running time is increased as a result,

energy is saved.

uThis is normal in energy-saving models.

A LED on the bottom rear of the appliance (at the

compressor) flashes regularly every 15 seconds*.

→The inverter is equipped with a diagnostic LED.

uThe flashing is normal.

Excessive noise.

→Due to the various speed steps, speed-regulated* compres-

sors can generate different running noises.

uThe sound is normal.

A bubbling and gurgling noise.

→This noise comes from the refrigerant flowing in the refriger-

ation circuit.

uThe sound is normal.

Malfunctions

* Depending on model and options 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr RBstd 528i Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr RBstd 528i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info