Bedienungsanleitung Liebherr SBSes7273 (Seite 6 von 16) (Englisch)

57026

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

4.5.3 Switching on the dispensing unit

To switch on the dispensing unit: (see 5.8.11) .

5 Control

5.1 Brightness of the temperature

display

You can adjust the brightness of the temperature display to the

light conditions of the room in which the appliance is installed.

5.1.1 Adjusting the brightness

The brightness is adjustable between h0 (no illumination) and

h5 (maximum luminosity).

uTo activate the setting mode: press the SuperFrost button

Fig. 2 (3)

for about 5 s.

wThe display indicates c.

wThe menu symbol

Fig. 2 (17)

shines.

uUsing the Up setting button, freezer compartment

Fig. 2 (5)

or Down setting button, freezer compartment

Fig. 2 (4)

select h.

uTo confirm: briefly press the SuperFrost button

Fig. 2 (3)

uTo make the display brighter:

press Up button, freezer

compartment

Fig. 2 (5)

uTo make the display darker:

press Down button, freezer

compartment

Fig. 2 (4)

uTo confirm: press SuperFrost

button

Fig. 2 (3)

wThe brightness is adjusted to the new value.

uTo deactivate the set-up mode: press On/Off button, freezer

compartment

Fig. 2 (1)

-or-

uWait for 5 minutes.

wThe temperature is indicated again in the temperature

display.

5.2 Contrast of the temperature display

You can adjust the contrast between lettering and background

in the temperature display.

5.2.1 Adjusting the contrast

The contrast can be adjusted between 1 (low contrast) and 9

(high contrast).

uTo activate the setting mode: press SuperFrost button

Fig. 2 (3)

for about 5 s.

wThe display indicates C.

wThe menu symbol

Fig. 2 (17)

shines.

uUsing the Up setting button, freezer compartment

Fig. 2 (5)

or Down setting button, freezer compartment,

Fig. 2 (4)

select C.

uTo confirm: briefly press SuperFrost button

Fig. 2 (3)

uFor a higher contrast setting:

press Up button, freezer

compartment

Fig. 2 (5)

uFor a lower contrast setting:

press Down button, freezer

compartment

Fig. 2 (4)

uTo confirm: press SuperFrost

button

Fig. 2 (3)

wThe contrast is set to the new value.

uTo deactivate the setting mode: press On/Off button, freezer

compartment

Fig. 2 (1)

-or-

uWait for 5 minutes.

wThe temperature is indicated again in the temperature

display.

5.3 Child proofing

The child-proofing function enables you to make sure that the

appliance is not inadvertently switched off by playing children.

5.3.1 Setting the child lock function

uTo activate the setting mode: press SuperFrost button

Fig. 2 (3)

for about 5 s.

wThe display indicates c.

wThe menu symbol

Fig. 2 (17)

shines.

uBriefly press the SuperFrost button

Fig. 2 (3)

.to confirm.

When c1 is indicated in the

display:

uTto activate the child lock,

briefly press the SuperFrost

button

Fig. 2 (3)

wThe child lock symbol

Fig. 2 (21)

shines. c flashes in the

display.

When c0 is indicated in the display:

uto deactivate the child lock, briefly press the SuperFrost

button

Fig. 2 (3)

wThe child lock symbol

Fig. 2 (21)

goes out. c flashes in the

display.

uTo deactivate the set-up mode: press On/Off button, freezer

compartment

Fig. 2 (1)

-or-

uWait for 5 minutes.

wThe temperature is indicated again in the temperature

display.

5.4 Door alarm

For refrigerator/BioFresh compartment and freezer compart-

ment

If the door is open longer then 60 s, the audible alarm sounds.

The audible alarm is automatically silenced when the door is

closed.

5.4.1 Muting the door alarm

The audible alarm can be muted when the door is open. The

sound switch-off function is active as long as the door is left

open.

uPress alarm button

Fig. 2 (2)

wThe door alarm is silenced.

5.5 Temperature alarm

The audible alarm sounds if the freezer temperature is not cold

enough.

The temperature display and the alarm symbol

Fig. 2 (20)

flash

at the same time.

The cause of the temperature being too high may be:

-warm fresh food was placed inside

-too much warm ambient air flowed in when rearranging and

removing food

-power failure for some time

-the appliance is faulty

The audible alarm is automatically silenced, the alarm symbol

Fig. 2 (20)

goes out and the temperature display stops flashing

when the temperature is sufficiently cold again.

If the alarm status persists: (see Malfunction).

Control

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr SBSes7273 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr SBSes7273

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info