Bedienungsanleitung Liebherr SBSes7273 (Seite 12 von 16) (Englisch)

57026

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

uPush back the left paddle with a container.

water

uPush back the right paddle with a container.

Setting the water intake time

The opening time of the IceMaker valve can be set if, for

example, the water pressure in the pipe is too low or too high.

The water intake time is adjustable in steps from E1 (short

intake time) to E8 (long intake time).

uTo activate the setting mode: press the SuperFrost button

Fig. 2 (3)

for about 5 s.

wThe display indicates c.

wThemenu symbol

Fig. 2 (17)

shines.

uUsing the Up setting button, freezer compartment

Fig. 2 (5)

and Down setting button, freezer compartment

Fig. 2 (4)

select E.

uTo confirm: briefly press the SuperFrost button

Fig. 2 (3)

uTo increase the water intake

time: press the Up setting

button, freezer compartment

Fig. 2 (5)

uTo reduce the water intake

time: press the Down setting

button, freezer compartment

Fig. 2 (4)

uTo confirm: press the Super-

Frost button

Fig. 2 (3)

uTo deactivate the setting mode: press the On/Off button,

freezer compartment

Fig. 2 (1)

-or-

uWait for 2 minutes.

wThe temperature is indicated again in the temperature

display.

Activating the child lock of the dispensing unit

uPress the paddle lock button

Fig. 2 (15)

for 3 s.

wThe LED above the button shines. The child lock is

activated.

wThe paddles are disabled.

Deactivating the child lock of the dispensing unit

uPress the paddle lock button

Fig. 2 (15)

for 3 s.

wThe LED above the button goes out. The child lock is

deactivated.

wThe paddles can be used again.

Setting the lighting of the dispensing unit

The light mode can be changed according to the following

pattern: 1-2-3-1

1. Lighting of dispensing unit and lighting of paddle are off. In

a dispensing operation (actuation of a paddle) only the

lighting of the dispensing unit switches on. Once the

paddle is released, the lighting stays at full luminosity for

about 3 s and is then dimmed.

2. Lighting of dispensing unit is off. Lighting of paddle is on.

In a dispensing operation (actuation of a paddle) the

lighting of the dispensing unit also switches on. Once the

paddle is released, the lighting stays at full luminosity for

about 3 s and is then dimmed. The paddle lighting stays

on.

3. Lighting of dispensing unit is on and lighting of paddle is

off. Nothing changes when a paddle is actuated.

uPress the light button

Fig. 2 (16)

the number of times

needed until the setting wanted is reached.

6 Maintenance

6.1 Changing the water filter

The water filter should be changed when the filter button

Fig. 2 (14)

lights up, but no later than after 6 months given the

specified output, or should a distinct reduction in flow rate be

noted. You can order the filter from a specialist dealer or visit

us at www.Liebherr.com.

The spent water filter contains activated charcoal and can be

disposed of together with normal domestic refuse.

To remove the old water filter:

uTurn the water filter anticlockwise

through approx. 100° and remove

it.

uCollect any dripping water by

hand or in a bowl.

To insert the new water filter:

uInsert the water filter and turn it

clockwise through approx. 100°

up to the stop.

uAllow water to run for about 3

minutes at the dispenser to

remove air from the system:

Actuate the paddle several times

because it switches off automati-

cally after about 30 seconds. Wait

about 1 second before re-

actuating the paddle.

uCheck whether the filter is leak-

proof and no water escapes.

Note

New water filters may contain suspended matter.

uDo not use the first filling of the ice-cube drawer. Throw it

away.

uRemove any ice cubes still present in the IceMaker drawer.

The ice cubes can be kept in reserve in another drawer.

uTo reset the timer, press the filter

button for 2 seconds.

6.2 Defrosting with NoFrost

The NoFrost system automatically defrosts the appliance.

Refrigerator compartment:

The defrost water evaporates due to the compressor heat.

Drops of water on the rear wall are perfectly normal.

Freezer compartment:

The moisture condenses on the evaporator, is periodically

defrosted and evaporates.

uThe appliance does not have to be manually defrosted.

Maintenance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr SBSes7273 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr SBSes7273

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info