Bedienungsanleitung Liebherr WKr4211 (Seite 4 von 9) (Englisch)

495713

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Setting the temperature

To increase the temperature

Press the Up button.

To reduce the temperature

Press the Down button.

- When pressing one of the buttons for the first time, the display

will start to flash.

- Pressing this button again enables you to change the temperature

setting.

- The electronic controls will switch over automatically about

5 seconds after the last time you pressed the button, and the

actual temperature will be displayed.

Storing wine

If you are storing wine for long periods of time, it should be stored

at a temperature of between 10°C and 14°C.

This is the temperature wine cellars are kept at, and it is just right

to allow wine to mature properly.

The following drinking temperatures are recommended for the

various types of wine.

Red wines: +14°C to +18°C

Rosé wines: +10°C to +12°C

White wines: +8°C to +12°C

Sparkling wines, Prosecco +7°C to +9°C

Champagne +5°C to +7°C

Operating and control elements

Temperature display

Temperature setting buttons

Audible warning on/off button

Child lock activated symbol

On/off button

Fan button

Switching the appliance on and o

To switch the appliance on

Press the On/O button until the temperature display

lights up.

To switch the appliance o

Keep the On/O button pressed for approx. 3 seconds so that

the temperature display goes out.

Setting up

• Avoid positioning the appliance in direct sunlight or near cookers,

radiators and similar sources of heat.

• The floor on which the appliance stands should be horizontal

and level.Compensate for uneven floors with the adjustable feet.

•

Do not cover ventilation openings

or grille.

• Standard EN 378 specifies that the room in

which you install your appliance must have

a volume of 1 m

per 8 g of R 600a refriger-

ant used in the appliance, so as to avoid the

formation of inflammable gas/air mixtures in

the room where the appliance is located in

the event of a leak in the refrigerant circuit.

The quantity of refrigerant used in your ap-

pliance is indicated on the type plate on the

inside of the appliance.

• Always install the appliance directly against

the wall.

Dimensions

WKr 1811 A = 890 mm B = 613 mm C = 1172 mm

WKr 3211 A = 1350 mm B = 739 mm C = 1298 mm

WKr 4211 A = 1650 mm B = 739 mm C = 1298 mm

Electrical connection

Only operate the appliance with alternating current (AC).

The permissible voltage and frequency are indicated on the type

plate. The position of the type plate is shown in the section entitled

Description of the appliance.

The socket must be properly earthed and protected by a fuse.

The tripping current of the fuse must be between 10 A and 16 A.

The socket must not be situated behind the appli-

ance and must be easily accessible.

Do not connect the appliance using an exten-

sion cable or extension socket.

Do not use stand-alone inverters (conversion

of direct current to alternating/three-phase

current) or energy-saving plugs. Risk of dam-

age to the electronic control system!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr WKr4211 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr WKr4211

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info