Bedienungsanleitung Liebherr WKr4211 (Seite 8 von 9) (Englisch)

495713

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Malfunctions

• F1 appears in the display.

– The appliance has suffered a fault. Contact the customer service

department.

You may be able to rectify the following faults by checking the

possible causes yourself.

• Appliance does not function

– Is the appliance switched on?

– Is the plug correctly fitted in the mains socket?

– Is the socket fuse intact?

• When inserting the mains plug, the refrigeration unit does

not switch on, but a value is shown in the temperature

display.

– Demo mode is activated. Deactivate demo mode as described

in the section entitled Additional functions - Demo mode.

• Loud running noise

– Is the appliance set up firmly on the floor?

– Does the appliance cause nearby items of furniture or objects

to vibrate? Ensure that the appliance is stable and that all parts

at the back can vibrate freely.Please note that noises caused by

the refrigerant circuit cannot be avoided.

• The temperature is not low enough

– Is the temperature setting correct (see „Setting the temperature“)?

– Does the separately installed thermometer show the correct

reading?

– Is the ventilation system working properly?

– Is the appliance set up too close to a heat source?

If none of the above causes

apply and you cannot rectify

the fault yourself, contact the

nearest customer service

department stating the type of

appliance

, service number

and appliance number

indicated on the type plate.

The position of the type plate is shown in the section entitled

Description of the appliance.

Changing over door hinges

Door hinges should only be changed by a trained expert.

Changing the door hinges must be done by two people.

1. Remove screw from lower

hinge bracket.

2. Open the door approx. 45° and lift

upwards.

Important

As a result of its heavy weight, the

door on models WKr 3212 and

WKr 4212 must be raised and re-

moved by one person while the other

executes the intermediate steps.

3. Push the pin upwards using your

fingertip.

4. Pull the door to the front and remove

it downwards.

5. Transfer plug.

6. Transfer door handle and

plugs to the other side.

7. Unscrew the pin.

Use the spanner provided.

8. Transfer the covers to the opposite side.

9. Screw in the pin on the opposite side.

Cleaning

Before cleaning always switch o the appliance. Pull out

the mains plug or remove/unscrew the fuse.

• Clean the inside and outer walls with lukewarm water and a lit-

tle detergent. Do not use abrasive or acid cleaners or chemical

solvents.

• Use a glass cleaner to clean the glass surfaces and a commercially

available stainless-steel cleaning agent for the stainless-steel

surfaces.

Do not use steam cleaners because of the

risk of injury and damage.

• Ensure that no cleaning water penetrates into the elec trical

components or ventilation grille.

• Do not damage or remove the type plate on the inside of the

appliance. It is very important for servicing purposes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr WKr4211 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr WKr4211

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info