Bedienungsanleitung Liebherr XRFsf 5245 (Seite 39 von 50) (Englisch)

805299

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Temperature zone Recommended

setting (see

Temperature)

Temperature

when E-Saver

activated

Fridge

compartment

5 °C 7 °C

Temperatures

Activating E-Saver

uTap navigation arrow repeatedly until corresponding

function is displayed.

E-Saver

Fig. 15

uComplete the steps (see Fig. 15) .

wEnergy-saving mode is activated.

Deactivating E-Saver

uTap navigation arrow repeatedly until corresponding

function is displayed.

E-Saver

Fig. 16

uComplete the steps (see Fig. 16) .

wEnergy-saving mode is deactivated.

CleaningMode

This setting makes it easy to clean the appliance.

This setting is relevant to the fridge section Fig. 1 (A).

Use:

-Clean the fridge section manually.

What happens with the appliance when this setting is on:

-The refrigerator compartment is switched off.

-The internal light is on.

-Reminders and warnings are not shown. There is no

acoustic signal.

Activating/deactivating settings

uActivate/deactivate setting (see 6.2 Operating logic) .

wOn: Fridge compartment is switched off. Light stays on.

wOff: preset temperature is restored.

The setting is automatically deactivated after 60 minutes.

Then the appliance continues operation in normal mode.

Display brightness

With this setting, you can choose a brightness level for the

display.

You can set the following brightness levels:

-40%

-60%

-80%

-100%

Choosing the setting

uSet the level (see 6.2 Operating logic) .

Door alarm

Set the time before the door alarm (see Close the door)

sounds.

Options are as follows:

-1 min

-2 min

-3 min

-Off

Choosing the setting

uSet the level (see 6.4 Error messages) .

Entry lock

This setting avoids accidental operation of the appliance,

e.g. by children.

Use:

-Avoid unintentional changing of settings and functions.

-Avoid unintentional switching off of the appliance.

-Avoid unintentional temperature adjustments.

Activating/deactivating settings

uActivating/deactivating (see 6.2 Operating

logic) .

Info

This setting allows the appliance information to be read out

as well as access to the customer menu.

It provides the following information:

-Model name

-Index

-Serial number

-Service number

View appliance data

uPress the navigation arrows Fig. 5 (1) repeatedly until the

settings are displayed.

uPress Confirm Fig. 5 (2).

uPress the navigation arrows Fig. 5 (1) repeatedly until the

information display appears.

uRead the appliance data.

Reminder

Reminders are displayed acoustically by a beep and visually

by a symbol in the display. The signal gets louder until the

alert stops.

Replace the FreshAir active carbon filter

This message appears when the air filter needs replacing.

uReplace the air filter every six months.

uConfirm the message with OK.

wThe service interval resets.

Use

* Depending on model and options 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr XRFsf 5245 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr XRFsf 5245

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info