Bedienungsanleitung Line 6 Helix Control (Seite 59 von 62) (Englisch)

693633

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

ASIO

Driver Settings (Windows

only)

When using Helix as an audio interface for Windows

DAW applications, it is highly

recommendedtocongurethesoftwaretoutilizethe"ASIO

" Helix driver. The Line

6 ASIO

driveroersthesuperior,low-latencyaudioperformancerequiredforDAW

recording. This driver selection is typically found in your DAW software's Preferences

or Options dialog - see your software's documentation.

NOTE: Download and install the latest Line 6 Helix ASIO

driver from

line6.com/software.

Once the ASIO

Helix driver has been selected in your DAW software, you'll also see a

button in the same dialog for "ASIO

Settings" (or with a similar title). Press this button

to launch the Helix Control Panel, which is where you make the following Helix driver

settings.

Sound

Control

Panel

This button launches the Windows

Sound Control Panel, which is

whereyoucanoptionallycongureHelixtobetheaudioplayback

device for multi-media applications (such as Windows

Media

Player, iTunes

, etc.) These settings are not relevant for your DAW

software, since these applications utilize the standard Windows

driver.

Default Bit

Depth

Select the Bit Depth at which Helix will operate for recording and

playback with your DAW software. 24 bit or 32 bit are recommend-

ed for quality audio production.

ASIO

Buer Size

Your goal is to achieve the lowest latency possible in your DAW

software,butwithglitch-freeaudioperformance.Smallerbuer

size results in lower latency, however, also increases the demands

on your computer, which can result in clicks, pops or other audio

artifacts. Start with a lower slider setting here and, if you encounter

audio performance issues, come back to this panel and move this

slider to the right incrementally to remedy the problem.

Click the Apply and OK buttons when your Helix Control Panel settings are complete

to return to your DAW software. Please also refer to your DAW software's documenta-

tionformoreaboutitsownspecicaudiodevice,buerandprojectsettings.

Core Audio Driver Settings (Mac

OS X

only)

To use Helix as an audio interface for Mac

applications, it is not necessary to install

any additional driver. Helix will utilize the Mac

computer's "Class Compliant" USB

driver automatically simply by connecting to your USB port. Helix will then appear

as a selectable Core Audio device within the Mac

Utilities > Audio MIDI Setup panel

and/or directly within your audio and multimedia applications. However, note that this

Apple Class Compliant driver oers strictly 48kHz native sample rate operation. If

youprefertouseadierentnativesamplerate(orifyourparticularDAWapplication

requires it), you can optionally download and install the Line 6 Mac

Core Audio driver

from line6.com/software.This Line 6 driver oers 44.1kHz,48kHz,88kHzor96kHz

sample rate operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Line 6 Helix Control Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Line 6 Helix Control

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info