602197
6
Zoom out
Zoom in
Vorherige Seite
1/43
Nächste Seite
Cable Gateway
5
Chapter 2:Getting to Know the
Cable Gateway
The Cable Gateway’s ports are located on the back panel of the Cable Gateway,
as shown in Figure 2-1.
On/Off Switch This switch is used for turning the Cable Gateway
on and off.
Power The Power port is where you will connect the power
adapter.
Reset Press this button to restore the Cable Gateway to it
factory default settings.
Home PNA This is where you can connect your cable for Home
PNA.
USB This is where you can use a USB cable to connect a
PC or other network device to the Cable Gateway.
Ports 1-4 These four ports are used to connect network
devices, such as PCs, print servers, and remote hard
drives to your local area network (LAN).
Cable The Cable port is where you will connect your coax-
ial Cable line.
Wireless PC Card Slot This is where you can connect the optional wireless
PC card (model number WPC11, not included) for
wireless features.
The Cable Gateway’s Back Panel Ports
Figure 2-1
Instant Broadband
®
Series
This user guide covers the basic steps for setting up a network with the Cable
Gateway. After going through the Chapter 2: Getting to Know the Cable
Gateway, proceed through the following chapters:
Chapter 3: Connecting the Cable Gateway
This chapter instructs you on how to connect the coaxial Cable line to the
Cable Gateway and connect the PC(s) to the Cable Gateway.
Chapter 4: Configuring the PCs
This chapter instructs you on how to configure your PC(s) for a DHCP con-
nection, if the network settings are not already set to DHCP.
Chapter 5: Using the Cable Gateway’s Web-based Utility
This chapter explains how to configure the Cable Gateway for wireless net-
working using your web browser and the Cable Gateway’s web-based utility.
When you’re finished with the basic steps, you are ready to connect to the
Internet through your new network. An example of such a network is shown in
Figure 1-1.
4
Network Setup Overview
Notebook with
Ethernet Adapter
Cable Gateway
with Modem / Router / USB / Home
PNA / 4-Port Switch / Wireless-Ready
LAN
PC with
Ethernet Adapter
WAN
Figure 1-1
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Linksys BEFCMUH4 Cable Gateway wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info