Bedienungsanleitung Linksys BEFW11S4 Wireless-B BroadBand Router (Seite 45 von 68) (Englisch)

602208

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Appendix A: Troubleshooting

Frequently Asked Questions

Wireless-B Broadband Router

Does the Internet connection of the Router support 100Mbps Ethernet?

The Router’s current hardware design supports up to 100Mbps Ethernet on its Internet port; however, the Internet

connection speed will vary depending on the speed of your broadband connection. The Router also supports

100Mbps over the auto-sensing Fast Ethernet 10/100 switch on the LAN side of the Router.

What is Network Address Translation and what is it used for?

Network Address Translation (NAT) translates multiple IP addresses on the private LAN to one public address that

is sent out to the Internet. This adds a level of security since the address of a PC connected to the private LAN is

never transmitted on the Internet. Furthermore, NAT allows the Router to be used with low cost Internet

accounts, such as DSL or cable modems, when only one TCP/IP address is provided by the ISP. The user may

have many private addresses behind this single address provided by the ISP.

Does the Router support any operating system other than Windows 98, Windows Millennium, Windows

2000, or Windows XP?

Yes, but Linksys does not, at this time, provide technical support for setup, configuration or troubleshooting of

any non-Windows operating systems.

Does the Router support ICQ send file?

Yes, with the following fix: click ICQ menu -> preference -> connections tab->, and check I am behind a firewall

or proxy. Then set the firewall time-out to 80 seconds in the firewall setting. The Internet user can then send a file

to a user behind the Router.

I set up an Unreal Tournament Server, but others on the LAN cannot join. What do I need to do?

If you have a dedicated Unreal Tournament server running, you need to create a static IP for each of the LAN

computers and forward ports 7777, 7778, 7779, 7780, 7781, and 27900 to the IP address of the server. You can

also use a port forwarding range of 7777 ~ 27900. If you want to use the UT Server Admin, forward another port.

(Port 8080 usually works well but is used for remote admin. You may have to disable this.) Then in the

[UWeb.WebServer] section of the server.ini file, set the ListenPort to 8080 (to match the mapped port above) and

ServerName to the IP assigned to the Router from your ISP.

Can multiple gamers on the LAN get on one game server and play simultaneously with just one public IP

address?

It depends on which network game or what kind of game server you are using. For example, Unreal Tournament

supports multi-login with one public IP.

How do I get Half-Life: Team Fortress to work with the Router?

The default client port for Half-Life is 27005. The computers on your LAN need to have “+clientport 2700x”

added to the HL shortcut command line; the x would be 6, 7, 8, and on up. This lets multiple computers connect

to the same server. One problem: Version 1.0.1.6 won’t let multiple computers with the same CD key connect at

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys BEFW11S4 Wireless-B BroadBand Router Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info