Bedienungsanleitung Linksys BEFW11S4 Wireless-B BroadBand Router (Seite 46 von 68) (Englisch)

602208

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Appendix A: Troubleshooting

Frequently Asked Questions

Wireless-B Broadband Router

the same time, even if on the same LAN (not a problem with 1.0.1.3). As far as hosting games, the HL server does

not need to be in the DMZ. Just forward port 27015 to the local IP address of the server computer.

How can I block corrupted FTP downloads?

If you are experiencing corrupted files when you download a file with your FTP client, try using another FTP

program.

The web page hangs; downloads are corrupt, or nothing but junk characters are being displayed on the

screen. What do I need to do?

Force your Ethernet adapter to 10Mbps or half duplex mode, and turn off the “Auto-negotiate” feature of your

Ethernet adapter as a temporary measure. (Please look at the Network Control Panel in your Ethernet adapter’s

Advanced Properties tab.) Make sure that your proxy setting is disabled in the browser. Check our website at

www.linksys.com for more information.

If all else fails in the installation, what can I do?

Reset the Router by holding down the reset button until the Power LED fully turns on and off. Reset your cable or

DSL modem by powering the unit off and then on. Obtain and flash the latest firmware release that is readily

available on the Linksys website, www.linksys.com.

How will I be notified of new Router firmware upgrades?

All Linksys firmware upgrades are posted on the Linksys website at www.linksys.com, where they can be

downloaded for free. To upgrade the Router’s firmware, use the System tab of the Router’s web-based utility. If

the Router’s Internet connection is working well, there is no need to download a newer firmware version, unless

that version contains new features that you would like to use. Downloading a more current version of Router

firmware will not enhance the quality or speed of your Internet connection, and may disrupt your current

connection stability.

Will the Router function in a Macintosh environment?

Yes, but the Router’s setup pages are accessible only through Internet Explorer 4.0 or Netscape Navigator 4.0 or

higher for Macintosh.

I am not able to get the web configuration screen for the Router. What can I do?

You may have to remove the proxy settings on your Internet browser, e.g., Netscape Navigator or Internet

Explorer. Or remove the dial-up settings on your browser. Check with your browser documentation, and make

sure that your browser is set to connect directly and that any dial-up is disabled. Make sure that your browser is

set to connect directly and that any dial-up is disabled. For Internet Explorer, click Tools, Internet Options, and

then the Connection tab. Make sure that Internet Explorer is set to Never dial a connection. For Netscape

Navigator, click Edit, Preferences, Advanced, and Proxy. Make sure that Netscape Navigator is set to Direct

connection to the Internet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys BEFW11S4 Wireless-B BroadBand Router Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info