612980
16
Zoom out
Zoom in
Vorherige Seite
1/41
Nächste Seite
Chapter 3
Advanced Configuration
13
Wireless-N Access Point with Dual-Band
Before upgrading the firmware, download the Access Point’s
firmware upgrade file from www.linksysbycisco.com.
Firmware Upgrade
Please select a file to upgrade the firmware Click
Browse and select the firmware upgrade file. Then c
lick
Start to Upgrade and follow the on-screen instructions.
WARNING: The firmware upgrade must not
be interrupted; do not reboot or power off the
Access Point during the firmware upgrade..
Status > Access Point
The Access Point’s current status information is displayed.
Status > Access Point
Access Point Information
Firmware Version The Access Points current firmware
version is displayed.
Local Network
Local MAC Address The Access Point’s MAC Address, as
seen on your local, wired Ethernet network, is displayed.
Access Point IP Address The Access Points IP Address, as
seen on your local network, is displayed.
Subnet Mask The Subnet Mask configured for your local
network is displayed.
Default Gateway The Default Gateway configured for
your local network is displayed.
Status > Wireless Network
Information about your wireless network is displayed.
Status > Wireless Network
MAC Address The Access Point’s MAC Address, as seen
on your local, wireless network, is displayed.
Mode The wireless mode used by the network is
displayed.
Network Name (SSID) The wireless network name or
SSID is displayed.
Wireless Band The radio band used the Access Point is
displayed.
Channel Width The channel width setting, in MHz, is
displayed.
Wide Channel Depending on the channel settings of
your Access Point, the Wide Channel is displayed.
Standard Channel The Standard Channel setting is
displayed.
Security The security method used by the Access Point
is displayed.
SSID Broadcast The status of SSID broadcast (enabled or
disabled) is displayed.
Status > About
Information about the browser-based utility is displayed.
Status > About
Web Server
Powered By The web server of the browser-based utility
is displayed.
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Linksys WAP610N wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info