Bedienungsanleitung Lite-On lvw 5001 dvd recorder ext retail (Seite 14 von 35) (Englisch)

234611

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

TV channel setup

Automatic TV channel search

When the automatic channel search function is activated, the TV

channels are searched and stored in a specific order. If the channel

assignments of your TV content provider changes or if you are

reinstalling the DVD-Recorder, you may need to start this proce-

dure again.This will replace the stored TV channel with the new

ones.

1.Ensure the antennas are securely connected to

the DVD-Recorder.

2.Switch on the TV set and the DVD-Recorder.

3.Press [SETUP] to bring up the “SETUP” menu,

press [p] [q] to select the “TV TUNER” and

press [u].

4.Press [p] [q] to select “Utilities” and press

[u].

5.Press [p] [q] to select “START SCAN” and

press [ENTER] to start auto channel search.

6.The auto TV channel search starts. The proce-

dure may take few minutes.

7.When all the TV channel have been searched

and stored, press [SETUP] to exit.

Adding or deleting TV channel manually

After you have performed the automatic channel search, you may

like to add or delete some of the TV channels. This function allows

adding or deleting channel manually.

1.Press [SETUP] to display the “SETUP” menu,

press [p] [q] to select “TV TUNER” and press

[u].

2.Press [p] [q] to select “Uilities” and press

[u].

3.Press [p] [q] to select “Add/Delete” and press

[ENTER] to bring up the add/delete menu.

4.Press [t] [u][p] [q] to select the channel(s)

that you want to add or delete and press

[ENTER] to confirm it.

Move the cursor to the TV channel and you can press [ENTER]

again to cancel delete operation.

5.Press [t] [u][p] [q] to select “EXIT” and

press [ENTER] to save setting and exit the add/

delete menu.

Fine-tuning TV channel manually

After you have performed the automatic channel search you may

like to fine tune the TV channel signal manually. Follow the steps

below to complete fine tune.

1.Press [SETUP] to bring up the “SETUP” menu,

press [p] [q] to select the “TV TUNER” and

press [u].

2.Press [p][q] to select “FINE” and press [u].

3.Press [p][q] to fine tune the channel signal.

Swapping TV channel manually (following TV)

This function allows users to manually swap the TV channel order

stored in DVD-Recorder to match the TV channel order stored in

users’ TV set.

1.Press [SETUP] to display the “SETUP” menu,

press [p] [q] to select the “TV TUNER” icon

and press [u].

2.Press [p] [q] to select “Swap” and press

[ENTER] to bring up the “SWAP” menu.

3.Select the TV channel(s) to be swapped and

press [ENTER] to mark it/them.

4.Press [p] [q][t] [u] to select a new channel

position and press [ENTER] to swap.

5.To swap more TV channels, repeat step “3” to

complete the settings.

6.Select “EXIT” to save the setting and exit the

“SWAP” menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lite-On lvw 5001 dvd recorder ext retail Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info