Bedienungsanleitung Loewe ARS Audio AC3 - dts L27xx (Seite 6 von 30) (Englisch, Französisch, Spanisch)

475071

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

- 6

english

Standard settings

If you want to set up or change a speaker system:

34 Select Configuration/modification,

OK calll selection.

6 Select complete,

OK continue to connect and set the

front speakers.

34 Select External speakers,

6go to the menu line below and

34set the lower limit frequency of the front speakers

in 10 Hz steps.

➠

Select the initial value of the speaker frequency response

(e.g. 50Hz at specification "frequency response 50-

20.000Hz“) for the right setting. See the technical data of

the speakers for the value.

➠ If necessary, you can also replace the external front

speakers by the TV speakers. In this case, select

TV speakers. You then transmit the sound of the front

speakers.

OK continue to connect and set the

surround speakers.

34 Select yes for external speakers.

➠ If no surround speakers are connected, these can be

simulated using the front and center speakers.

6Go to the menu line below and

34set the lower limit frequency of the surround

speakers in 10 Hz steps.

➠

Select the initial value of the speaker frequency response

OK continue to connect and set the

centre speakers.

34

Select whether the TV speakers or an external

speaker is(are) to reproduce the center sound or no

if no center speaker is connected.

6for external speaker or TV speaker, go to the

menu line below and

34set the lower limit frequency of the center speaker

in 10 Hz steps.

➠ Select the initial value of the speaker frequency response

for the correct setting. For the TV speakers you will find

the value under "Technical data" in the TV User

Guide.

➠

If no center speaker is connected, the front speakers

additionally transmit the center sound parts.

OK continue to connect the Subwoofer.

34 yes is the selection for subwoofer.

➠ If no subwoofer is connected, the front speakers trans-

mit the sound parts intended for the subwoofer additi-

onally as far as possible.

continued on next page



END

Proceed

Complete

Distances only

Connections only

Configuration/modification of speaker system

Sound components

Sound components wizard

Please specify here whether you want to completely reconfigure a speakers

system or whether you want to limit the configuration to changing the

speaker connections, the speaker distances from the listening position or

the individual speaker levels in relation to each other.

Levels only

END

External speakers

Connect front speakers

Sound components

Sound components wizard

Please specify here whether you want to connect

external front speakers. In this case, their lower

limit frequency must be entered in Hz (see

instruction manual and technical data of the

speakers).

40 Hz

Proceed

TV speakersTV speakers

40Hz

END

70Hz 70Hz

External speakers

70 Hz

Connect front speakers

Sound components

Sound components wizard

Please specify here whether you want to connect

external front speakers. In this case, their lower

limit frequency must be entered in Hz (see

instruction manual and technical data of the

speakers).

Proceed

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe ARS Audio AC3 - dts L27xx Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe ARS Audio AC3 - dts L27xx

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info