Bedienungsanleitung Loewe ARS Audio AC3 - dts L27xx (Seite 7 von 30) (Englisch, Französisch, Spanisch)

475071

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

7 -

english

Standard settings

OK continue to Subwoofer phase.

Switch to a station with music with P+/P– or start playback

with music on a DVD player.

34Test both values (0º and 180º) and select the one

with which you get a clearer bass reproduction

from your sitting position.

OK to confirm the setting and exit the wizard.

This ends the sound component wizard for connection

and set-up of a speaker system.

Assignment of the digital audio input

For digital sound reproduction via the speaker system or the active spea-

kers from an external device, e.g. from a DVD player, you have to feed

the digital audio signal to the TV set at the AUDIO DIGITAL IN socket.

If the video signal is fed into the TV set via one of the Euro AV sockets

or COMPONENT IN, you have to assign the digital sound to the used

socket.

➠ You will find other details on this in the TV User Guide in the chapter

"Assignment of the digital audio input".

OK continue to set the

Distance from the left front speaker.

➠

Measure the distances respectively from your listening

position to the front, surround and center speakers.

The Dolby Digital Decoder calculates the delay times

for the speaker signals from these so that they reach

the listener simultaneously.

34Set the distance of the front left speaker from your

listening position in 10 cm steps.

OK continue respectively to the other speaker and

34set the distance.

➠ After setting the distance for the center speaker ...

OK continue to Adjust speaker level.

34Set the volume for every speaker.

6 Select speaker manually.

➠ For balanced audio reproduction all speakers should be

set at the same volume level. A noise signal will be

reproduced automatically on each speaker in successi-

on. Set every speaker to equal perceived volume from

your sitting position.

END

Proceed

Distance to left front speaker

4,2 m

Sound components

Sound components wizard

Please enter the distance of the left front

speaker from your listening position here.

4,2m 4,0m

1,0m 0,9m

2,7m

0dB 0dB

END

Adjust speaker level

0 dB

Sound components

Sound components wizard

You hear a sound from every speaker one after

another. But you can also select the speakers

manually with the menu control buttons up/down.

Set the volume for the respectively active speaker

shown in blue so that you get approximately the

same volume impression from all the speakers.

Proceed Preceding/next loudspeaker

END

0°

Subwoofer phase

Sound components

Sound components wizard

Here you can reverse the phase of your subwoofer. Test both values in music

reproduction and then select the one with which you get a better bass

reproduction.

180°

Proceed

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe ARS Audio AC3 - dts L27xx Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe ARS Audio AC3 - dts L27xx

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info