Bedienungsanleitung Loewe klang s1 (Seite 23 von 380) (Alle Sprachen)

807074

Zoom out

Zoom in

Vorherige Seite

1/380

Nächste Seite

Loewe klang s1/s3

deutsch

english

12.1 Station search

To search for receivable stations, you can start

an automatic search. To do this, use the

button to open the menu and select [Scan].

The [Scan] appears on the display, as well as

the number of stations found so far and a cor-

responding progress bar. The stations are then

saved in alphabetical order.

Stations that were found during a previous

search but cannot currently be received are

shown in the station list with a “?” in front of the

station name.

12.2 Manual tune

You can also set ensembles manually. To do this,

use the button to call up the menu and select

[Manual tune]. Then select the desired station

and confirm with OK. Now information about the

ensemble and the signal strength are displayed.

Another pressing of the OK button saves the

corresponding stations in the list.

12.3 Station list

Press the button and confirm [Station list]

with OK. Use the / buttons to select a

station and press OK to confirm. The device

starts playing automatically.

Note: The reception quality of a station depends

on factors such as weather, installation location

and antenna orientation. If a station from the

station list cannot be received, change the

orientation of the antenna or the location of the

radio. Stations that can no longer be received

can be removed from the station list.

12.4 Delete stations that can no

longer be received

Stations that can no longer be received can be

deleted from the list. To do this, press the

button and select [Prune invalid]. Under [This

removes all invalid stations, continue?]

select [YES] and these stations will be deleted.

Selecting [NO] takes you back into the menu

without deleting the stations.

12.5 Favourites (memory

locations)

40 memory locations (favourites) are available

for storing DAB+ stations.

12.5.1 Storing DAB+ stations on the

direct selection buttons Fav1

or Fav2 on the radio

(klang s1 only):

On the radio, you can assign memory locations

1 - 2 using the keys on the unit. To do this, select

the desired station and press a Fav1 or Fav2 key

until [Preset stored] appears on the display.

The memory locations can be called up by

pressing the button briefly.

12.5.2 Saving DAB+ stations in

memory locations 1 - 40

Select the desired station and hold down the

button on the radio or on the remote control.

Now select a memory location from the list of

station memories and confirm the selection with

the OK button on the radio or on the remote

control. The [Preset stored] appears on the

display.

You can easily call up the memory locations by

briefly pressing the button on the radio or on

the remote control. Use the / buttons to

select a station and press OK to confirm.

Note: The memory locations cannot be deleted,

but can only be overwritten with other stations.

12.6 DRC (Dynamic Range

Control)

Some DAB+ stations support DRC, which redu-

ces the difference between loud and soft tones.

The following settings are possible:

[DRC high]:

Strong compression of the different volumes.

The dynamic is greatly reduced.

[DRC low]:

Low compression without much loss of dyna-

mics.

[DRC off]:

There is no compression.

To make the settings, proceed as follows:

Press the button and select [DRC]. The

settings for DRC can be changed in the following

menu. The current setting is indicated by [*].

12.7 Station order

By default, the radio sorts the stations in alpha-

betical order. The stations can also be sorted

by ensembles. To make the settings, proceed

as follows:

Press the button and [Station order]. The

settings can be changed in the following menu.

The current setting is indicated by [*].

13 FM Radio

Before you can tune and listen to FM radio,

you will need to install antenna (not provided

within the scope of delivery) on the back side

of the radio.

Select [FM RADIO] in the home menu to switch

to FM reception.

13.1 Station search

You can automatically search for FM stations. To

start the automatic station search, please press

the OK button on the remote control or on the

radio. The search stops at the next station found

and starts playing.

13.2 Search settings

You can use this function to determine whether

only stations with a strong reception signal

are taken into account. To do this, press the

, button and select [Scan setting]. In the

following menu [FM station scan] you can

now answer the question [Strong stations

only] with [YES] or [NO]. The current setting

is identified by [*].

13.3 Audio settings

For stations with poor reception, a slight quality

improvement can be achieved by switching to

mono reception. To do this, press the button

and select [Audio setting]. In the following

menu [FM weak reception] you can now

answer the question [Listen in Mono only]

with [YES] or [NO]. The current setting is

identified by [*].

13.4 Favourites (memory

locations)

40 memory locations (favourites) are available

for storing FM stations.

13.4.1 Storing FM stations on the

direct selection buttons Fav1

or Fav2 on the radio

(klang s1 only):

On the radio, you can assign memory locations

1 - 2 using the keys on the unit. To do this, select

the desired station and press a Fav1 or Fav2 key

until [Preset stored] appears on the display.

The memory locations can be called up by

pressing the button briefly.

13.4.2 Storing of FM stations in

memory locations 1 - 40:

Select the desired station and hold down the

button on the radio or on the remote control.

Now select a memory location from the list of

station memories and confirm the selection with

the OK button on the radio or on the remote

control. The [Preset stored] appears on the

display.

You can easily call up the memory locations by

briefly pressing the button on the radio or on

the remote control. Use the / buttons to

select a station and press OK to confirm.

Note: The memory locations cannot be deleted,

but can only be overwritten with other stations.

14 Bluetooth Audio

The Bluetooth function enables the wireless

transmission of music files (audio streaming)

to the radio. Smartphones, tablets or similar

devices can be paired. To do this, select the

source [Bluetooth Audio] in the home menu.

Digital radio DAB+ | FM Radio | Bluetooth Audio

Loewe klang s1 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info