Bedienungsanleitung Loewe klang s1 (Seite 24 von 380) (Alle Sprachen)

807074

Zoom out

Zoom in

Vorherige Seite

1/380

Nächste Seite

Loewe klang s1/s3

deutsch

english

14.1 Pairing Bluetooth devices

for the first time

Make sure that the terminal device to be pai-

red is switched on and Bluetooth is activated.

Select the source [Bluetooth Audio] in the

home menu. The [Bluetooth Discoverable]

appears on the display. Now open the Bluetooth

settings on the terminal device to be paired and

start searching for available Bluetooth devices

there. Select “Loewe klang s1 (s3)” and start the

pairing process.

After successful pairing, [Connected] appears

on the display. Now the music playback can be

controlled via the phone/tablet. To do this, use

the music App of your choice.

Basic operation of play/pause and skip forward/

backward is possible using the corresponding

buttons on the remote control.

Note: Some devices require a PIN code when

connecting, then enter “0000”.

14.2 Automatic connection after

pairing has already taken

place

If the source is switched from [Bluetooth

Audio] or the radio is switched off, the Blue-

tooth connection is disconnected. If the radio

is switched on again or switched back to the

[Bluetooth Audio] source, an automatic con-

nection is established.

Note: If an automatic connection is not possible,

please proceed as follows:

Press the button and select [View details].

Then open the [Paired Device List], to select

and connect the desired device. Press the OK

button to establish the connection and [Con-

nected] appears briefly on the display.

14.3 Pairing another device

To connect another device to the radio, plea-

se press the button and select [Setup

Bluetooth]. This will disconnect the current

connection.

Now proceed as when you first pair a device.

Afterwards, this device is also saved in the list

of paired devices and can be selected via the

corresponding menu (see above). A maximum

of 8 devices can be saved.

15 CD (klang s3 only)

You can use this source to listen to your CDs.

Please select the source [CD] in the home menu.

15.1 CD playback

Insert a disc into the CD compartment. Only

standard 12 cm discs are supported. Make sure

the CD label side is facing the front side of the

radio. The CD starts playing automatically. Press

or repeatedly to skip to the previous/next

track. Press and hold or to rewind or fast

forward current track.

Tip: Insert a CD when the radio is in standby

mode. The radio wakes up and starts playing

the disc.

Note: Some MP3 files may not be supported.

15.2 Random play and repeat

To play CD tracks/MP3 files in random order or

play files repeatedly:

To turn on shuffle play, press the button,

select [Shuffle] and press OK to confirm. Then

select option [On] and press the OK button

again to confirm.

To repeat tracks, press the button, select

[Repeat] and press OK to confirm. Then select

[Repeat 1] to repeat one track or [Repeat all]

to repeat all tracks. Confirm your selection by

pressing the OK button.

15.3 Ejecting a CD

To eject the disc from the CD compartment,

press the button on the radio.

16 Sleep timer

With this function you can switch the radio

to standby mode automatically after a set

period of time. You can choose between 15,

30, 45 or 60 minutes, [Sleep OFF] deletes

the previously set period of time. To do this,

press the button while the audio source is

selected and select [Main menu]. Use the

or to navigate in the menu and select

[Sleep]. Use the or button in the [Set

sleep time] menu to select the desired

time period and confirm with the OK button.

Exit the menus again with the button.

Alternatively, you can use the button on the

remote control to set the time period.

The remaining time is shown in the bottom left

of the display, with minutes running backwards.

17 Alarm clock

This radio has 2 individually adjustable alarm

times. You can call up the alarm clock from the

main menu. Press the button while the audio

source is selected and select [Alarms].

17.1 Enable

Select here on which days the alarm should be

activated. The following selection is available:

[Off] / [Daily] / [Once] / [Weekend] /

[Weekdays]

Select [Off] to deactivate an activated alarm

clock.

17.2 Time

Set the hours first with the or buttons and

then the minutes after pressing the OK.

17.3 Mode

Here you set the audio source with which you

want to wake up. The following selection is

available: [Buzzer] / [Internet radio] / [DAB]

/ [FM]

17.4 Preset

The station with which to wake up is specified

here. The station last listened to or the stations

saved in the favourites are available here. Does

not apply to buzzer mode.

17.5 Volume

Set the desired alarm volume here.

17.6 Save

Once you have made all the settings, please

press the OK button to save the settings.

An activated alarm clock is shown with an alarm

symbol and the number of the active alarm clock

at the bottom left of the display. In standby mode

you can also see the set alarm time.

17.7 Switching off the alarm

clock after waking up

To switch off the alarm clock until the next alarm

cycle, please press the button on the device

or on the remote control [Alarm off] appears

briefly on the display. If you only want to interrupt

the alarm function for a few minutes (snooze),

you can use any other button. The alarm delay

is set by pressing a button in steps 5, 10, 15 and

30 minutes and can also be extended again and

again. After a short time, the radio automatically

switches back to [Standby] and the time re-

maining until waking up again is displayed next

to the flashing alarm symbol.

Note: The saved wake-up times are retained in

the event of a power failure.

18 System settings

In the system settings you can change the

settings of the radio and call up important infor-

mation about it. To display the System settings

menu, press the button on the remote control

or press and hold the button on the radio. The

menu of selected audio mode is displayed. In

this menu, select [System settings] to open

the System settings menu. The [System set-

tings] menu contains following choices:

[Equaliser]

[Network]

[Time/Date]

[Language]

[Factory reset]

[Software update]

[Setup wizard]

Bluetooth Audio | CD (klang s3 only) | Sleep timer | Alarm clock

System Settings

Loewe klang s1 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info