Bedienungsanleitung Logitech z-5500 (Seite 5 von 23) (Englisch, Französisch)

227344

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Selecting Your Source Input

Pressing the Input button cycles through the various audio input sources.

The inputs will always cycle in the same order, as shown below.

With 2-position Switch in ‘6 Ch. Direct’ Mode:

• Direct: input stream from the analog inputs

• Optical: input stream from the optical input

• Coax: input stream from the coax input

Cycling through the inputs is always the same unless you have the 2-position switched to stereo 1-3 mode.

With 2-position Switch in ‘Stereo 1-3’ Mode:

• Stereo 1: Use the Front L/R analog input (lime green) as a stereo input

• Stereo 2: Use the Rear L/R analog input (black) as a stereo input

• Stereo 3: Use the Center/Sub analog input (orange) as a stereo input

• Optical: input stream from the optical input

• Coax: input stream from the coax input

Whenever the input or bitstream changes, the previously selected effect will be automatically re-selected. For example, if

you select Stereo x2 while listening to the 6 ch. Direct input, ‘Stereo x2’ will be stored in memory for the ‘Direct’ Input. The

next time you select the Direct input, Stereo x2 will be automatically selected as the effect.

When returning from Standby, the previously selected input and effect will be shown on the control pod.

Effects

The effect button is used to select the type of surround sound or audio technology you want to use with a particular

input. In many cases, the control pod will recognize what audio technology is streaming from your audio device, and will

automatically select it.

For example, if you are watching a DVD and have selected the Dolby® Digital 5.1 stream on the DVD, then when you select

the DVD audio input, Dolby® Digital will automatically be the selected effect. The control pod will default to the last effect

used by whatever input source you are using.

You can use the ‘effect’ button to select a different audio technology if you wish to change it. Note that not all effects are

available for all inputs (refer to the table):

Repeatedly pressing the ‘effect’ button rotates through the available options for that type of input. If only one effect

option is available, then the effect button will have no impact. Each effect is described below. For more information about

surround sound and other digital audio technologies, visit www.logitech.com.

•

DTS®: Decode the DTS® stream using the DTS® decoding algorithm (or DTS® 96/24 algorithm, depending on the

bitstream). Your audio source must have a DTS® 5.1 soundtrack.

WHAT IT IS: DTS® is a digital audio stream that gives you discrete 5.1 audio. When enabled it will give you full

surround sound with separate front, rear, and center channels.

• Dolby® Digital: Decode the Dolby® Digital 5.1 stream using the Dolby® Digital decoding algorithm. Your audio

source must have a Dolby® Digital soundtrack.

WHAT IT IS: Dolby® Digital 5.1 is a digital audio stream that gives you discrete 5.1 audio. When enabled it will give

you full surround sound with separate front, rear, and center channels.

• Pro Logic II Movie: Decode the Dolby® Digital stereo, PCM stereo, or analog 2 channel stream using the Pro Logic

II Movie decoding algorithm.

WHAT IT IS: Pro Logic II Movie is a surround sound format that creates 5.1 surround sound from stereo movie

sources. When enabled it will give you full surround sound with front, rear, and center channels from a stereo signal.

PC2 movie is optimized for movie content.

• Pro Logic II Music: Decode the Dolby® Digital, PCM stereo, or L/R analog 2 channel stream using the Pro Logic II

Music decoding algorithm.

WHAT IT IS: Pro Logic II Music is surround sound format that creates 5.1 surround sound from stereo music

sources. When enabled it will give you full surround sound with front, rear, and center channels from a stereo signal.

PC2 music is optimized for music playback.

• 6 Channel Direct: Send all 6 channels from the direct input straight to the ampliﬁ ers without applying any

decoding algorithm.

WHAT IT IS: This direct analog stream is raw audio, without decoding. Depending on the audio type, you may or

may not receive surround sound.

Operation

POSSIBLE EFFECTS

INPUT

DTS® DOLBY®

DIGITAL

PRO

LOGIC II

MOVIE

PRO

LOGIC II

MUSIC

6 CHANNEL

DIRECT

STEREO

optical / coax

(DTS® 5.1 stream)



optical / coax

(Dolby® Digital 5.1 ch)



optical / coax

(Dolby® Digital 2 ch stereo)

 

optical / coax

(PCM stereo)

 

Direct



Stereo 1, Stereo 2, Stereo 3

 

Table 1 - Surround Sound/Audio Effects Available by Input Stream

English

Z-5500d_manual_AMR.indd 8-9Z-5500d_manual_AMR.indd 8-9 3/23/05 3:49:06 PM3/23/05 3:49:06 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Logitech z-5500 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Logitech z-5500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info