757006
75
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
77
User Manual
sentence with the coordinates of a new Waypoint, the symbol moves to the new point. The default
setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' + "EXTERN WPT" + 'ENTER'
File
It is a collection of information (of the same type) stored on a User C-CARD. Each file must have a
unique name, ideally one that describes its contents. Filenames are kept in a directory on each User C-
CARD (see Par. 4.6).
Filter Dump
Sets the Filter step. Move cursor key up/down to insert value in the range [500 - 12000], move it to the
left/right to move the cursor, press 'ENTER'. A bigger value means on heavy filter and it is applied to
both position and speed filter. The default value is 500.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "FILTER DUMP" + 'ENTER'
Find
The chartplotter allows finding Nearest Services, Port By name, Tide Stations, Wrecks, Obstructions.
'MENU' + "FIND" + 'ENTER'
Fix (menu)
Turns On/Off the Dead Reckoning, Fix Correction, the Position Filter and the Speed Filter, enables
the Compute Correction and Correction Offset functions, sets the desired value for Filter Dump and
Static Navigation.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER'
Fix Correction
Turns On/Off the Correction from the positioning system. If the new Correction is calculated, but the
Correction is not enabled, the ship's position is not changed. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "FIX CORRECTION" + 'ENTER'
Fix Datum
Selects the Fix Datum. WGS 1984 is the default Fix Datum.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "FIX DATUM" + 'ENTER'
Fonts & Symbols
On MAX charts it is possible to set the size of all names and symbols drawn on the charts, selecting
between Normal size (the regular characters size) and Large size.
'MENU' + "MAP SETTINGS" +'ENTER' + "Fonts & Symbols" + 'ENTER'
Formatting
The formatting of a User C-CARD must be done before using a new User C-CARD: this operation
prepares the User C-CARD to receive and store information. Before you start the formatting proce-
dure, insert a new User C-CARD into the slot. Be sure to label it; the label will remind you that you
have formatted the User C-CARD, and will help you identify its contents. An used User C-CARD can
also be formatted; if a used User C-CARD is formatted, however, all previously stored data on the User
C-CARD will be completely deleted (see Par. 4.6).
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER' + "FORMAT" +
'ENTER'
Goto
Sets a particular mark on the map, called Target or Destination (see Par. 3.4, 4.1.1.4 and 4.2.1.3).
'DEST'
GPS = Global Positioning System
It is a satellite based navigation system operated by the US Department of Defense. It gives the naviga-
tor a position 24 hours a day, 365 days a year under any weather conditions.
75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lorenz STARLIGHT PRO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info