28
6. Highlight
YES and press ENTER. Press EXIT repeatedly to return to
the main display.
NMEA 2000 Alarms
When you set a NMEA 2000 Alarm for a pressure sensor, a pop-up
window will appear and an alarm will sound when pressure exceeds or
falls below a preset PSI level of your choosing.
To turn on/off NMEA 2000 Alarm:
1. Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER.
2. Highlight
NMEA 2000 ALARMS and press ENTER.
3. Highlight
FLUID LEVEL DEVICE and press ENTER. Select the desired
pressure sensor and press
ENTER.
4. Highlight the
ENABLED box next to the desired alarm (High Pressure
or Low Pressure) and press
ENTER to turn on the alarm. When the
alarm is on an "X" will be placed in the Enabled Box.
5. To set the PSI level for an alarm, press → to highlight
VALUE and
press
ENT.
6. Use the arrow keys to input the desired PSI and press
ENTER.
Repeat Steps 3-4 to set the other alarm.
7. Highlight
SET CONFIGURATION and press ENTER to finalize alarm
settings. Press
EXIT repeatedly to get back to the main display.
NOTE:
To turn off (uncheck) an alarm, select its
ENABLED BOX and press
ENTER. Highlight the SET CONFIGURATION button and press ENTER.
Alarm Status Tab
The Alarm Status tab is the second tab at the top of the NMEA 2000
Alarms page. When an alarm has been set for a device, the alarm and
its current status will be shown on the Alarm Status window.
To view Alarm Status:
1. Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER.
2. Select
NMEA 2000 ALARMS and press ENTER.
3. Highlight the Alarm Status tab.
4. Press
EXIT repeatedly to return to the main display.
