541008
110
Zoom out
Zoom in
Vorherige Seite
1/118
Nächste Seite
10.6.1 Installation of the Compass Module
The device consists of two parts: a compass sensor and an electronic device. Pay attention
to the flight direction arrow and install the compass unit horizontally. All connections are
plug-and-play so no mistake is possible. A RS485 splitting unit to extend the RS485 bus is
included. The compass module should be installed as far as possible away from magnetic,
electrical and steel parts (loud speakers and analogue vario indicators contain strong
magnets). Even the mechanical compass should be as far away from the sensor as possible.
The minimum distance is 20 cm. As mentioned above the arrows should be aligned
accurately in the flight direction and parallel to the fore and aft axis of the glider. For a
proper installation a flat area parallel to the horizontal plane is needed.
The orientation is clearly marked on the label which is on the bottom of the unit.
10.6.2 First Test After Installation
An external reference compass is required which can either be a prismatic landing compass
or a calibrated compass base on the airfield surface. Using the reference compass the glider
should be aligned in each of the eight main directions (360°, 45°, 90°, 135°, 180°, 225°,
270° and 335°). Now the glider should be oriented to the north direction whilst also
watching the HDG raw data on the compass calibration page (do not try to compensate the
compass yet). If the HDG varies more than ±rotate the compass so that the deviation
decreases below ±5°.
Now turn the aircraft to the other directions and read the displayed values (don’t change the
compass position anymore). If they vary more than ±15° look for another place for the
compass module.
Wind
True airspeed
and true
heading
Ground speed and
ground track
110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LX NAV LX 8000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von LX NAV LX 8000

LX NAV LX 8000 Bedienungsanleitung - Deutsch - 158 seiten

LX NAV LX 8000 Kurzanleitung - Holländisch - 15 seiten

LX NAV LX 8000 Bedienungsanleitung - Holländisch - 81 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info