541008
112
Zoom out
Zoom in
Vorherige Seite
1/118
Nächste Seite
At the end press the OK button to save the calibration data or press CANCEL to cancel the
changes in which case the previous settings will remain.
Switch the unit OFF by using the OFF button to store the calibration data properly.
The calibration data will remain until next calibration procedure.
10.6.4 Final Check
Go back to the compass calibration page and check again the corrected data for all 8
directions. The error should now be less than 1° 2° (better to have 1° ). If the errors are
larger than one should search for faults in the installation or in the adjustment procedure.
When the final test is satisfactory your LX8000 is ready to calculate the wind with the
compass method.
The calibration is specific for your combination of aircraft and compass which
means that you cannot transfer the compass to another aircraft whilst using the
same calibration values. It is recommended to repeat the calibration procedure
every year.
10.6.5 Input of Local Magnetic Variation
The correct input of local magnetic variation is essential. Use the QNH and RES menus.
False magnetic variation may degrade the wind calculation significantly. If auto variation is
selected the LX8000 automatically calculates the magnetic variation from a mathematical
model. See Chapter 5.1.1 for more details.
10.7 Remote Control
The remote control consists of two parts: a leather coated stick with built-in electronics and
a printed circuit board which connects the wires coming out from the stick to the LX8000
RS485 system bus. The stick is available in three diameters: 18 mm, 20 mm and 24 mm.
All necessary electronics is built into the top of the stick and only the wires from the control
tube to the interface unit need to be used. This solution makes the installation very easy.
Additionally two shielded cables are used for speed command key and PTT.
112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LX NAV LX 8000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von LX NAV LX 8000

LX NAV LX 8000 Bedienungsanleitung - Deutsch - 158 seiten

LX NAV LX 8000 Kurzanleitung - Holländisch - 15 seiten

LX NAV LX 8000 Bedienungsanleitung - Holländisch - 81 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info