Bedienungsanleitung Lynx Aurora LT-TB (Seite 28 von 55) (Englisch)

587002

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

 Rate Lock

When the “Current Source” is “Internal” and Rate Lock is ON, the driver will ignore all

requests to change the Sample Clock Rate, including those coming from applications. This

effectively causes all files not running at the currently selected clock rate to be software

sample rate-converted by the Operating System during playback or recording. When clocking

to an external clock source, the Rate Lock function is effectively ON regardless of this switch

setting, and the rate is locked to the same rate of the incoming clock.

RATE LOCK On is primarily useful in cases where material of various sample rates may be

played, but a static sample rate is desired - for instance when digital devices are connected

that don’t support all of the sample rates desired.

 SynchroLock

This button can turn the SynchroLock clocking system On and Off. SynchroLock is Lynx’s

proprietary technology for attenuating jitter on clock inputs and providing a stable clock for

all digital signals passed through the Aurora. For information about what SynchroLock does,

and how it does it, see page 13 of the Aurora User’s Guide.

This button also shows the status of the SynchroLock clocking system. Prior to achieving

lock, the four green LED’s give an indication of the completion of various lock stages.

During this time the wide range analog PLL maintains lock.

Working: In this state SynchroLock is analyzing the input clock signal and making

adjustments to frequency and phase. This process typically takes two to three minutes to

complete. The four LED’s show progress towards final lock: One green LED denotes

frequency lock to 3.2 ppm accuracy, two LED’s denote frequency lock to 1.6 ppm accuracy,

three LED’s denote frequency lock to 0.6 ppm and the transition to the phase lock stage, four

LED’s denote the start of the phase lock stage. When phase lock has been achieved, the

Yellow “Working” indicator changes to the green “Locked” indication.

Locked: Indicates the SynchroLock system has achieved final lock to an incoming clock

signal. This indicator will also appear when the SYNC SOURCE is set to “Internal”.

Range: Indicates that the selected external clock source is not within the SynchroLock lock

range.

Disabled: Indicates that SynchroLock has been manually disabled using the SynchroLock

control in the Settings menu: Settings->Advanced->SynchroLock

 Preferred Clock Source

This section of the mixer provides control of the system sample clock generator. All Aurora-

TB play and record devices on a single card MUST have identical sample rates since there is

one on-board generator. Sample rates cannot be changed while the Aurora is playing or

recording, unless “Allow Clock Change if Active” is selected from the Lynx Mixer Settings

> Advanced menu. Clock sources available to choose from are:

Internal: Clock derived from the on-board crystal oscillator

External: Clock signal from BNC WORDCLOCK connector

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lynx Aurora LT-TB Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info