Bedienungsanleitung Lynx Aurora LT-TB (Seite 30 von 55) (Englisch)

587002

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

section can be “hidden” by clicking the RECORD button in the Lynx Mixer Toolbar. When

the section is hidden, all of the settings are still active. Clicking the RECORD button again

will make the section visible again.

Some of the controls and displays here are pertinent to the hardware inputs themselves, and

some are specific to the hardware monitoring settings for that input. We will look in detail at

each control.

 Input Source selection

This button reveals which physical input is assigned to the corresponding Record Device at

the bottom of the pane. The default configuration is for Analog Input 1 to be assigned to

Record 1, Analog Input 2 assigned to Record 2, etc. With an Aurora 8, Record Devices 9-16

are assigned to Digital Inputs 1-4 (the Digital Inputs have a stereo orientation, and appear as

Digital In 1 Left + Digital In 1 Right, etc.). For an Aurora 16, when in 16 channel mode only

the Analog Inputs are assigned by default. In 24-channel mode, Record Devices 17-24 are

assigned to Digital Inputs 1-4. In 32-channel mode, Record Devices 17-32 are assigned to

Digital Inputs 1-8.

Input names are abbreviated so that they can appear in 4 spaces. Sources that start with “A”

are for Analog and with “D” are for Digital. For instance, “AIn4” means Analog Input 4,

“DI4L” means Digital In 4 Left (Note: digital inputs have a stereo orientation, analog have a

mono orientation).

Clicking the Input Source button generates a menu with all of the Analog and Digital Inputs

available to choose from. For the vast majority of users the default configuration is ideal and

would never be changed. There are a few reasons why assigning inputs other than the

defaults may be beneficial:

 Assigning the same physical input (i.e. Analog In 1+2) to multiple Record devices

can allow the user to record the same signal into two different programs or onto

two different tracks within the same program

 If the Digital Inputs are being used primarily and not the Analog Inputs, It can be

useful to assigning the first record devices to the Digital Inputs instead of Analog,

so that they appear first in the list

 If using one pair of analog ins, and one pair of digital ins, is the typical working

method, then having those be in adjacent Record Devices can be convenient

When an input source button shows a Digital Input, the button will be Green when that Input

is locked to a valid digital signal, or it will appear as Red when no clock signal is present.

 Pan Pot

The Pan Pot knob controls the pan position of the input as it is being monitored through an

output. IT HAS NO EFFECT ON THE RECORDED SIGNAL. It is only pertinent to

monitoring.

Hardware, no latency input monitoring is implemented by clicking on a physical output

button at the bottom of the mixer screen. For instance, in the screen picture below, Analog

Out 1 and 2 have been selected (Output selection is always done with stereo pairs):

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lynx Aurora LT-TB Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info