Bedienungsanleitung Lynx ONE (Seite 18 von 36) (Englisch)

586987

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Page 18

Working with Third Party Applications

Audio I/O Selection

The selection of a desired audio input or output is accomplished by choosing the

associated audio device name in an application. Each device name is associated with a

connection on the LynxONE Audio cable, as listed in the table below. Using the table,

make the desired signal connections to the LynxONE Audio Cable and select the

appropriate audio device in your application.

Device Name Audio Cable Connector Usage

LynxONE Analog In LEFT IN, RIGHT IN Analog recording

LynxONE Analog Out LEFT OUT, RIGHT OUT Analog playback

LynxONE Digital In DIGITAL IN Digital recording

LynxONE Digital Out DIGITAL OUT Digital playback

MIDI I/O Selection

The selection of a desired MIDI input or output is accomplished by choosing the

associated MIDI device name in an application. Each device name is associated with a

connection on the LynxONE MIDI/Clock cable, as listed in the table below. Using the

table, make the desired signal connections to the LynxONE MIDI/Clock Cable and

select the appropriate MIDI device in your application.

MIDI/Clock

Device Name Cable Connector Usage

LynxONE Midi In 1 MIDI IN 1 MIDI Port 1 recording

LynxONE Midi Out 1 MIDI OUT 1 MIDI Port 1 playback

LynxONE Midi In 2 MIDI IN 2 MIDI Port 2 recording

LynxONE Midi Out 2 MIDI OUT 2 MIDI Port 2 playback

Controlling Audio Bit Depth

Creating a audio file with a particular bit depth (or resolution) is controlled through an

application’s recording settings. These settings are typically adjusted in an audio device

configuration menu or in a recording setup window just prior to recording. When

recording is initiated the LynxONE will generate audio samples of the desired resolution.

Bit depth control during playback of an audio file is also is also an application issue.

When a file is played, the recorded bit depth is read from the file’s header by the

application. The application uses this information to set the resolution of the LynxONE.

The LynxONE supports file types with 8, 16, 24, or 32 bit word widths. Note that 32-

bit files contain 24-bit data with zero data in the least significant bit positions.

Digital Input Recording and Monitoring Issues

When the digital input is selected for recording or as the Monitor Source in the LynxONE

Mixer, the LynxONE must synchronize its sample clock to the word clock embedded

in the incoming digital signal in order to extract the digital data. To accomplish this,

the source of sample clock generator is automatically switched to Digital. This action

can be observed by inspecting the Sample Clock Source in the LynxONE Mixer.

When Digital is selected as the sample clock source the sampling rate of all audio

devices on the LynxONE will equal the sample rate of the digital input source.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lynx ONE Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info