Bedienungsanleitung M-Audio Keystation 88 II (Seite 7 von 52) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

707322

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Rear Panel

1. DC Power Adapter Input: If you do not wish to power Keystation through the USB connection and are

using the MIDI connector to trigger an external sound module, connect a 9V DC, 200mA, center-positive

power adapter (sold separately) here.

2. USB Port: The USB port delivers power to the keyboard and transmits MIDI data when connected to a

computer to trigger a software synth or MIDI sequencer.

3. MIDI Out: Use a five-pin MIDI cable (sold separately) to connect this jack to the MIDI IN of an external

sound module or to the MIDI In of a synthesizer.

4. Sustain Pedal Input: This socket accepts a momentary-contact foot pedal (sold separately). When

pressed, this pedal will sustain the sound you are playing without having to keep your fingers pressed

down on the keys.

NOTE: The polarity of the sustain pedal is determined by the keyboard upon startup. When Keystation is

powering up, the sustain pedal is assumed to be in the "up" (Off) position. It is important that the sustain

pedal is not pressed during startup, otherwise the pedal will reverse its operation, and notes will sustain

when the pedal is not pressed.

NOTE: A foot pedal can be used for sustaining the sound that you are playing, without having to keep

your hands on the keyboard (just like the sustain pedal on a piano).

You can plug a foot pedal of any polarity, sold separately, into the foot pedal input on your M-Audio

keyboard. The keyboard will automatically detect the correct polarity when powering up. If you want to

reverse the polarity, simply depress the pedal when you switch on your keyboard.

5. Expression Pedal Input: Connect a 1/4" TRS expression pedal (sold separately) to this input for

adjusting the volume vibrato, or reverb depth of an instrument patch.

6. On/Off Switch: Use this switch to power the device on or off.

Advanced Functions

In addition to setting an octave shift, the two octave “+” and “-” buttons discussed earlier in the manual under

the section “Octave Buttons” can also be used to control one of six MIDI functions.

The first 6 labeled black keys are used to select the function of the octave buttons. Some of the functions that

these keys can be used for cannot send out a value less than 0. When used to control these functions, both

LEDs above the buttons will remain on, regardless of the current setting of that function.

To select an alternate function:

1. Press the Advanced Functions button, putting the keyboard into Edit Mode.

2. Press the black key that represents the function you want. Edit Mode will finish as soon as you have

selected the function and you will be able to play notes again.

VOLUME POWER

SUSTAINMIDI OUT

USB

ON/OFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

M-Audio Keystation 88 II Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info