Bedienungsanleitung M-Audio Keystation 88 II (Seite 8 von 52) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

707322

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Octave Shift

Another method of shifting the Keystation octaves is with the use of the keys labeled “Octave +” and “Octave

-”. After the Advanced Function button has been pressed, placing the keyboard in Edit Mode, pressing these

keys will shift the keyboard’s pitch up or down one or more octaves (one for each time pressed). The default

octave shift designation is “0” and will be the octave setting each time you power up the keyboard. The lights

above the octave buttons indicate that 0 octave shift is set when both are on.

To assign the “+” and “-” keys to control the octave:

1. Press the Advanced Functions button to get the keyboard into Edit Mode.

2. Press the black key representing “OCTAVE”. Edit Mode will finish as soon as OCTAVE has been

pressed.

There is also a method of performing a quick octave change, which can be useful when using the octave

buttons to control another MIDI function. This is accomplished as follows:

1. Press the Advanced Functions button to put the keyboard in Edit Mode.

2. Press the black key representing “OCTAVE +”, increasing the octave by 1 (you may press it again to

increase the octave by 2, and so on). Press the black key representing “OCTAVE -”, decreasing the

octave by 1 (you may press it again to decrease the octave by 2, and so on). Press the black key

representing "OCTAVE 0" to reset the octave shift to 0.

3. When you have chosen your octave shift press “ENTER,” to select your Octave and leave Edit Mode.

Selecting Cancel or Advanced will cancel the selection, and exit from Advanced mode.

Transposition

In some cases it may be useful to reduce or increase the pitch by a number of semitones rather than an

entire octave. For example, if you are playing a song with a singer that is having difficulty hitting the top

notes, you may want to reduce the pitch by one or two semitones. This is achieved using a MIDI function

called “Transpose.”

Transpose works in the same way as Octave Shift above, except the shift can be up to +/- 12 semitones. As

with Octave Shift, there are two ways of transposing the keyboard. You can use the Octave “+” and “-”

buttons, or the black keys “TRANSPOSE -,” “TRANSPOSE 0” and “TRANSPOSE +,” respectively.

To assign the Octave “+” and “-” buttons to transpose:

1. Press the Advanced Functions button to engage Edit Mode.

2. Press the black key representing “TRANSPOSE.” (Edit Mode will disengage as soon as

“TRANSPOSE” has been pressed.)

3. Press the “+” key and you will hear the pitch of the note you play go up.

4. Press both “+” and “-” together to cancel transpose.

MIDI Channel

MIDI data from the keyboard can be sent on any of 16 MIDI Channels. However, certain MIDI devices and

MIDI software applications require the keyboard to send data on a specified channel. If this is the case, you

can change the channel the data is sent using the following method:

1. Press the Advanced Functions button to engage Edit Mode.

2. Press one of the 16 Channel keys, according to the Channel that you need.

For example, if a device specifies that you need to send data on Channel 10, press the Advanced Functions

button, and select Channel 10. The Channel can also be assigned to the Octave “+” and “-” buttons. Once

assigned, pressing “+” or “-” will increase or decrease the channel incrementally.

When Channel 16 is reached and “+” is pressed, Channel 1 will be selected. If the Octave “+” and “-” keys

are selected to vary the Channel, the LEDs above the buttons will not change, since it is not possible to have

a Channel with a negative value. Pressing both the “+” and “-” buttons together will recall Channel 1.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

M-Audio Keystation 88 II Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info