Bedienungsanleitung M-Audio Oxygen 49 (Seite 6 von 88) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

707325

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

9. Pitch Bend Wheel: This wheel creates expressive changes in performances by raising and lowering pitch.

Rolling the Pitch Bend wheel upward will raise an instrument’s pitch whereas rolling it downward will lower the

pitch. The upper and lower pitch bend limit is determined by settings on your hardware or software

synthesizer, not by the Pitch Bend wheel on the Oxygen 49 keyboard itself. Typically, this can be either a half

note or an octave up/down. This wheel is spring mounted and will return to the center detent position when

released. The Pitch Bend wheel is an assignable controller capable of sending a variety of MIDI messages

other than pitch bend data.

10. Modulation Wheel: This wheel is used to add expression to performances by changing the intensity of certain

effects. By default, most synthesizers assign this wheel to control vibrato (change in intonation) or tremolo

(change in volume) although it is usually possible to reassign the function of this wheel through the

instrument’s control panel. Rolling the Modulation Wheel upward will increase the modulation effect, while

rolling downward will reduce the effect. The Modulation Wheel is an assignable controller capable of sending

a variety of MIDI messages other than Modulation data.

11. Control Buttons: These mapable buttons can be assigned to send Note, CC, and other MIDI messages. For

DirectLink operation, please see the DirectLink User Guide Available at m-audio.com/directlink.

Rear Panel

1. USB Port: The USB 2.0 port (backward-compatible with

USB 1.1) delivers power to the keyboard and transmits

MIDI data when connected to a computer.

2. Sustain Pedal Input: This input accepts a momentary-

contact foot pedal (not included). When pressed, this

pedal will sustain the sound you are playing without having

to keep your fingers pressing down on the keys. The

sustain pedal input can be assigned to send Note, CC, and other MIDI messages.

NOTE: The polarity of the sustain pedal is determined by the keyboard upon startup. When an Oxygen 49

keyboard is powering up, the sustain pedal is assumed to be in the "up" (Off) position. It is important that the

sustain pedal is not pressed during startup, otherwise the pedal will reverse its operation, and notes will

sustain when the pedal is not pressed.

3. On/Off Switch: Use this switch to power the device on or off. When this switch is set to the “on” position,

Oxygen 49 is powered through the USB connection to your computer.

4. Kensington Lock Connector: This connector is compatible with standard laptop-style Kensington security

cables for theft protection.

Advanced Keyboard Functions

Edit Button: The Edit button is used to access the advanced Oxygen 49 functions located on the keybed. Pressing

the Edit button switches your keyboard into Edit Mode. You can use the keys to select various advanced functions

and enter data.

To change the functionality of a fader, button, knob, etc.:

1. Press the Edit button.

2. Press the Select button or Control Select (Ctrl Sel) key.

3. Move or press the control corresponding to the control you would like to change or using the keys, enter the

numerical value of the control number.

4. Press the corresponding key of the parameter you would like to change (Ctrl Asgn, Data 1, Data 2, etc.)

5. Use the numeric keys to enter the value of the parameter.

Snapshot: Press the Shift button and the Auto button simultaneously to engage the Snapshot function. The

Snapshot function sends out the assigned MIDI Message and current value of all controls on the MIDI channel that a

control is set to. This feature lets you record current settings of the controls into your sequencer.

DirectLink Mode: Press the Auto button to go into DirectLink Mode. Knobs, buttons, “<” and “>”, and faders will

send pre-programmed automapped messages. None of these parameters can be edited while in DirectLink Mode.

For some DAWs and programs, you may need to download DirectLink profiles from m-audio.com/directlink.

Control Assign, Data 1, Data 2, Data 3: The Control Assign function (Ctrl Asgn) assigns a MIDI continuous control

number (MIDI CC) or other MIDI parameter to the selected knob, button, fader, wheel, or to the sustain pedal. The

Data 1, Data 2, and Data 3 keys define various related aspects of the parameter or function assigned to a control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

M-Audio Oxygen 49 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info