Bedienungsanleitung M-Audio Oxygen 49 (Seite 8 von 88) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

707325

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Velocity Curve: The Velocity Curve Select key (Vel Curve) is used to change the touch sensitivity of the keyboard or

pads. This setting lets you decide how the force with which you hit a key affects the volume at which a note plays.

Oxygen 49 keyboards provide 7 different sensitivity options:

1: C1 generates lower velocity values for the same force. This setting is useful for playing more quietly, even if you

tend to strike the keys harder.

2: C2 is the default setting, and is designed to be useful for most players with an "average" touch (people who play

with an average amount of force).

3: C3 generates higher velocity values for the same force. This setting is useful for playing more loudly, even if you

tend to strike the keys with less force.

4: C4 generates an equal velocity value for a given amount of force, resulting in a linear (or neutral) keyboard

response.

5: F1 is a setting that effectively disables sensitivity, meaning the keyboard will generate a fixed velocity value of 64

(on a scale of 0-127) regardless of how hard or soft the keys are struck.

6: F2 is a setting that effectively disables sensitivity, meaning the keyboard will generate a fixed velocity value of 100

(on a scale of 0-127) regardless of how hard or soft the keys are struck.

7: F3 is a setting that effectively disables sensitivity, meaning the keyboard will generate a fixed velocity value of 127

(on a scale of 0-127) regardless of how hard or soft the keys are struck.

1. Press the Edit button.

2. Press the Velocity Curve (Vel Curve) key (press Velocity Curve key twice to edit pad velocity settings). The LED

display will show the current velocity curve (for example, ".C.0.2").

3. Type the Velocity Curve number (1 through 7) using the number keys.

4. Press the Enter key.

- or –

1. Press the Edit button.

2. Press the Velocity Curve (Vel Curve) key (press Velocity Curve key twice to edit pad velocity settings). The LED

display will show the current velocity curve (for example, ".C.0.2").

3. Use the "<" or ">" buttons to scroll through the Velocity Curves (C1 through F3).

4. Press the Enter key.

Drawbar Mode: This parameter switches all 9 faders to Drawbar Mode. In this mode, the operation of the faders is

reversed, so that the maximum value (127) is at the bottom and the minimum value (0) is at the top. This feature is

intended for use with Organ presets that utilize drawbars.

1. Press the Edit button.

2. Press the Drawbar key. The LED screen will momentarily display "On". Drawbar Mode becomes active

immediately and Edit mode exits automatically. Repeat steps 1 and 2 to disable Drawbar Mode. The LED

screen will momentarily display "OFF".

Memory Dump: The SysEx Memory Dump function (Mem Dump) will send the contents of all 10 Preset memory

locations for storage in a DAW application. Please refer to the documentation provided with your DAW software for

information on how to record SysEx MIDI data.

1. Prepare a MIDI track within your DAW software to record from your Oxygen 49 keyboard.

2. Press the Edit button on your Oxygen 49 keyboard.

3. Start the MIDI recording in your DAW software.

4. Press the Memory Dump key on your Oxygen 49 keyboard. The SysEx memory dump will begin immediately

and the LED screen will display "SYS" to indicate that data is being sent. The SysEx file will appear as a new

MIDI recording in your DAW software.

Restoring a Memory Dump:

IMPORTANT: Restoring a saved Memory Dump will permanently overwrite all current presets on your Oxygen 49

keyboard. Restored settings will not become active until a new preset is loaded on your Oxygen 49 keyboard, or the

device has been powered off and on.

Play back a MIDI track that contains a previously recorded Oxygen 49 SysEx Memory Dump. The SysEx data is sent

back to the Oxygen 49 keyboard. The Oxygen 49 LED screen will display "SYS" while receiving the SysEx data.

Device ID: The Device ID function (DEV ID) allows the assignment of a unique SysEx Device ID to differentiate

between multiple MIDI devices of the same model, when sending or receiving SysEx data.

The default setting of 127 lets the keyboard respond to all incoming SysEx messages compatible with the same type

of Oxygen 49 keyboard controllers. However, if the Device ID is changed to any other value, the keyboard will only

respond to SysEx messages that contain the same Device ID number. This is useful in situations where multiple

Oxygen 49 controller keyboards are connected to the same DAW software and SysEx information needs to be sent

to a specific keyboard controller with a unique Device ID number.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

M-Audio Oxygen 49 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info