Bedienungsanleitung M-Audio Oxygen 49 (Seite 9 von 88) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

707325

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

1. Press Edit.

2. Press the Device ID key. The LED screen will show the current Device ID (for example, "1.2.7.").

3. Enter the new Device ID number using the number keys.

4. Press the Enter key.

NOTE: If the Device ID number of an Oxygen 49 keyboard is changed after a Memory Dump was recorded into a

DAW application, any attempts to restore it will be ignored because the numbers do not match. If you do not

remember the Device ID number used when the Memory Dump was recorded, set your Oxygen 49 keyboard to

Device ID 127 to ensure all Memory Dumps will be recognized.

Store: The Store function saves control assignment settings to one of 10 memory locations.

IMPORTANT: Storing new assignment settings will overwrite the contents of the selected memory location.

1. Press the Edit button.

2. Press the Store key. The LED screen will show the number of the last selected memory location (for example,

P.0.1).

3. Enter the number of the memory location you want to store the new settings to by using the number keys or the

“<” or “>” buttons.

4. Press the Enter key to save the changes and overwrite the previous settings of the memory location.

NOTE: The Oxygen 49 factory presets can be restored by holding down the "-" and "+" buttons during power up.

This will permanently erase all customized user settings.

Number Keys: This section of the keyboard is used to type in numerical parameter values while in Edit mode.

Enter Key: The Enter key confirms changes made and exits Edit mode.

NOTE: The Panic, Drawbar and Memory Dump functions take immediate effect when the corresponding key is

pressed. Edit mode will exit automatically.

Advanced Programming Functions

The MIDI CC (continuous controller) numbers from 0 to 127 are part of the General MIDI specification, and are

typically used for real-time control of parameters in MIDI compatible music equipment. For example, an Oxygen 49

knob may be assigned to MIDI CC number 10, which controls the Pan setting of a connected synthesizer or DAW

software track. Many of the controls on Oxygen 49 keyboards are fully programmable, and can be assigned to any

of these standard MIDI CCs. However, to simplify assignment of other, more complex MIDI message types (for

example, SysEx or RPN/NRPN), M-Audio has appended such additional MIDI message types to the end of the MIDI

CC number list, extending its range beyond 127.

These additional messages can be assigned to Oxygen 49 controls, just as if they were standard MIDI CCs, but

using numbers in the range from 128 to 255. Generally, this is achieved by selecting the control for editing and

assigning a 3-digit number.

This section provides examples of the typical control assignment procedure for knobs, faders, buttons, wheels, and

the sustain pedal. Assigning MIDI messages that are not explicitly mentioned in this section is done by using the

same basic principle as given in the examples.

NOTE: Your Oxygen 49 keyboard never transmits values outside the range specified by the MIDI protocol (0-127).

The controller numbers from 128-255 are only used internally by your Oxygen 49 keyboard. This simplifies

configuration of the knobs, buttons and faders when assigning advanced MIDI messages, and allows additional

configuration options for the controls (for example, setting the Trigger or Toggle operation of a button).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

M-Audio Oxygen 49 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info