Bedienungsanleitung Magnavox MBP5120F (Seite 38 von 48) (Englisch)

494141

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

a) Use [K/L] to select “Proxy Address”, then press

[OK]. Proxy address setting screen will appear.

Enter proxy address.

• The keyboard screen will appear.

Others

Proxy Address

abcdef ghi j

1 234567890

uvwxy z . - _

klmnopqrst

Clear

All Clear

a/A/@ OK

[K/L/s/B] : Move the highlight.

[the Number buttons] : Enter number.

[OK] : Enter the highlighted number/

word.

[RED] : Clear the entered number or

word.

[GREEN] : Clear all the entered numbers

or words.

[BLUE] : Switch between abc ? ABC ? @!?

[YELLOW] : Set the entered number or

word.

b) After you enter proxy address correctly, press

[YELLOW].

• Confirmation message will appear. Select

“Yes” to complete the settings.

Others

Is Setting OK?

xxxxx

Proxy Address

Yes

c) Use [K/L] to select “Proxy Port” , then press

[OK]. Proxy port setting screen will appear. Enter

proxy port number with number buttons.

Others

Please select the input Proxy Port.

then press `OK’

xxxxx

Proxy Address

d) After you enter proxy port correctly, press [OK].

2. Press [RETURN] to go back to the previous

screen, or press [SETUP] to exit.

Note

• The range of input numbers for the port

number is between 0 and 65535. (If you enter

a number larger than 65535, it will be regarded

as 65535.)

• For proxy port, certain ports might be closed,

blocked or unusable depending on your

network environment.

Connection Speed

You can set connection speed as your preference.

(The default setting is “Auto”.)

1. Press [OK] to show the options for

“Connection Speed”.

2. Use [K/L] to select the desired setting, then

press [OK].

“Auto”:

Set the appropriate connection speed

automatically, in accordance with your network

environment.

“10BASE Half”:

Set the connection speed to “10BASE Half”.

“10BASE Full”:

Set the connection speed to “10BASE Full”.

“100BASE Half”:

Set the connection speed to “100BASE Half”.

“100BASE Full”:

Set the connection speed to “100BASE Full”.

3. Press [RETURN] to go back to the previous

screen, or press [SETUP] to exit.

Note

• Choose a connection speed in accordance with

your network environment.

• The network connection may be disabled

depending on the device, when the settings are

changed.

BD-Live Setting

You can limit Internet access for BD-Live discs.

(The default setting is “Allow”.)

1. Press [OK] to show the options for “BD-Live

Setting”.

2. Use [K/L] to select the desired setting, then

press [OK].

“Allow”:

Internet access is permitted for all BD-Live

contents.

“Limited Allow”:

Internet access is permitted only for BD-

Live contents which have content owner

certificates. Internet access without the

certificates is prohibited.

“Prohibit”:

Internet access is prohibited for all BD-Live

contents.

3. Press [RETURN] to go back to the previous

screen, or press [SETUP] to exit.

MAC Address

You can check the MAC address of this unit. “MAC

Address” is for viewing only.

 Wireless

If you connect this unit to the network wirelessly, select

“Wireless” and set up necessary settings.

E5S02_03UD_MBP5120F_F7_OM_EN.indd 38E5S02_03UD_MBP5120F_F7_OM_EN.indd 38 2010/08/25 10:49:412010/08/25 10:49:41

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Magnavox MBP5120F Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info