Bedienungsanleitung Magnavox MBP5120F (Seite 39 von 48) (Englisch)

494141

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

In order to use a wireless network, you must set

up the connection to the wireless router.

Find wireless network

Search for wireless networks automatically and

select the wireless network name (SSID) from the

list.

1. In “Network Connection” menu, use [K/L] to

select “Network Selection”, then press [OK].

2. Use [K/L] to select “Wireless”, then press

[OK].

3. Use [K/L] to select “Wireless Router”, then

press [OK].

4. Use [K/L] to select “Find wireless network”,

then press [OK].

• This unit will start searching for wireless

networks automatically.

5. The list of wireless networks will be

displayed. Use [K/L] to select the

appropriate wireless network name (SSID),

then press [OK].

• This unit will start searching for the

authentication setting of the selected

wireless network automatically.

Others

Find wireless network

Page Down

AP1

AP2

AP3

AP4

AP5

AP6_Test

1/ 2

If the unit finds the authentication setting of the

selected wireless network, skip to step 7. If the unit

fails to find the authentication setting automatically,

proceed to step 6 to select it manually.

6. Use [K/L] to select the authentication

setting of the selected wireless network,

then press [OK].

Others

Find wireless network

WEP/WPA Authentication

None

WEP

WPA-PSK (TKIP)

WPA-PSK (AES)

WPA2-PSK (TKIP)

WPA2-PSK (AES)

• For a wireless network with authentication

setting, select the authentication setting,

according to the security type of the wireless

network.

• For a wireless network without authentication

setting, select “None”.

“None”:

Set the authentication setting to “None”.

“WEP”:

Set the authentication setting to “WEP”.

“WPA-PSK (TKIP)”:

Set the authentication setting to “WPA-PSK (TKIP)”.

“WPA-PSK (AES)”:

Set the authentication setting to “WPA-PSK (AES)”.

“WPA2-PSK (TKIP)”:

Set the authentication setting to “WPA2-PSK

(TKIP)”.

“WPA2-PSK (AES)”:

Set the authentication setting to “WPA2-PSK

(AES)”.

7. “WEP/ WPA Key” entry screen will appear.

Enter the WEP/WPA key of the selected

wireless network using cursor buttons,

number buttons and color key, then press

[YELLOW].

• Confirmation message will appear. Select “Yes”

to complete the settings.

Others

Is Setting OK?

SSID

WEP/WPA Authentication

WEP/WPA Key

API

WPA2-PSK(AES)

**************...

Wireless Router

Yes

8. Following screen will appear. Use [K/L]

to select “Yes”, then press [OK] to go to

“Advanced Settings”.

• For further operation, refer to “Advanced

Settings” on page 40.

Others

Find wireless network

Yes

Wireless router settings are incomplete.

Please use "Advanced Settings" to complete your setup.

9. Press [SETUP] to exit.

Note

• For a wireless network with authentication

setting, key icon appears to the right hand of

the wireless network name (SSID).

• Signal icon shows the strength of the signal.

• WEP/WPA key appears as asterisks on the

confirmation screen.

E5S02_03UD_MBP5120F_F7_OM_EN.indd 39E5S02_03UD_MBP5120F_F7_OM_EN.indd 39 2010/08/25 10:49:422010/08/25 10:49:42

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Magnavox MBP5120F Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info