Bedienungsanleitung Makita BCX3400 (Seite 4 von 28) (Englisch)

598439

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Personal protective equipment

• The clothing worn should be functional and appropriate, i.e.

it should be tight-tting but not cause hindrance. Do not wear

either jewelry or clothing which could become entangled with

bushes or shrubs.

In order to avoid head-, eye-, hand- or foot injuries

as well as to protect your hearing, the following

protective equipment and protective clothing

must be used during operation of the brushcut-

ter.

• It is recommended to wear a protective helmet; it is imperative

when working in forests. The protective helmet (1) should be

checked at regular intervals for damage and must be replaced

after 5 years at the latest. Use only approved protective

helmets. If you have long hair, always wear a hairnet!

• The face shield (

2) of the protective helmet protects against

ying sawdust, wood chips or stone chippings. During ope-

ration of the brushcutter always wear goggles or a visor to

prevent eye injuries.

• Wear adequate noise protection equipment to avoid hearing

impairment (ear muffs (3), ear plugs, etc.). Octave band

analysis upon request.

• The forestry safety jacket (

4) is equipped with special red-

colored shoulder parts. The arms and neck should always

be protected by clothing.

• The protective trousers (

5) are made from a nylon fabric with

22 layers and protects against cuts. We strongly recommend

its use. In any case, it is essential that a long pair of trousers

made of tough material be worn during operation of the

brushcutter. Do not wear short pants.

• Protective gloves (

6) made of thick leather are part of the

prescribed equipment and must always be worn during

operation of the brushcutter.

• Safety shoes or boots (

7) tted with anti-skid sole, steel toe

caps and leg protection must always be used. Safety shoes

equipped with a protective layer give protection against cuts

and ensure a secure footing. Do not wear sandals or go

barefoot.

Handling fuels/refueling the brushcutter

Stop the engine and let the engine cool down

before refueling the brushcutter.

No smoking and no open ame!

Fuel may contain substances similar to solvents.

Eyes and skin should not come in contact with

mineral oil products. Always wear protective

gloves when refueling. Frequently clean and

change protective clothes. Do not breathe in fuel

vapors. Inhalation of fuel vapors can be hazardous

to your health.

• Before refueling the brushcutter make sure it is in a

stable

position.

• Do not spill fuel or oil. When you have spilt fuel or oil immedi

ately clean the brushcutter. Fuel should not come in contact

with clothes. If your clothes come in contact with fuel, change

them at once.

• Ensure that no fuel oozes into the soil (environmental pro

tection). Use an appropriate base.

• Refueling is not allowed in closed rooms. Fuel vapors will

accumulate near the oor (explosion hazard)!

• Carefully tighten the locking screw of the fuel tank and inspect

the fuel cap at regular intervals.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BCX3400 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita BCX3400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info