Bedienungsanleitung Makita BCX3400 (Seite 5 von 28) (Englisch)

598439

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

• Change the place before starting the engine at least 3 meters

from the place of refueling.

• Fuel cannot be stored for an unlimited period of time. Buy

only as much as will be consumed in the near future.

• Use only approved and marked containers for the transport

and storage of fuel. Ensure children have no access to

fuel.

Putting into operation

Never work alone. In case of emergencies, another

person must be within shouting distance. Before

beginning to work, inform the other person about

the protective devices available on the machi-

ne!

• Children and other persons must remain more than 15 me

ters from the working area. Keep an eye out for animals as

well.

• Before use always check that the brushcutter is safe for

operation: Make sure the cutting tool is securely installed.

The throttle must automatically return to the off position when

released, and the throttle lever lock must work properly. The

cutting tool must not turn during idling. The handles should

be clean and dry. The on/off switch must function properly.

The protective devices must be undamaged and securely

installed in the correct position (see Chapter "Operation").

Otherwise you are in danger of injury!

• Start the brushcutter only in accordance with the instructions

(see Chapter "Operation". Do not use any other methods

for starting the engine!

• Use this brushcutter and its cutting tools only for the above-

mentioned uses they are intended for as specied in the

documentation.

Start the brushcutter only after complete assembly

and inspection. Operation of the machine is only

permitted after all the appropriate accessories

are attached!

The cutting tool must be equipped with its appro

priate cutter guard. Never run the cutter without

this cutter guard.

• The cutting tool must not turn during idling. If necessary

adjust the idling speed (see Chapter "Operation").

• Before starting, make sure that the cutting tool has no contact

with hard objects such as branches, stones, etc.

• The engine must be switched off immediately if there are

any noticeable changes in the behavior of the equipment.

• Should the cutting tool hit stones or other hard objects,

immediately switch off the engine and inspect the cutting

tool.

• Inspect the cutting tool at frequent intervals for damage (detect

hairline cracks by means of tapping – noise test). Hairline

cracks can occur in the region of the base of the teeth after

long use. Damaged cutting tools and cutting tools with

hairline cracks must not be used any longer under any

circumstances!

• Operate the brushcutter only with the shoulder strap attached,

which is to be suitably adjusted before putting the brushcutter

into operation (see Chapter "Preparations"). It is essential

to adjust the shoulder strap according to the user’s size to

prevent fatigue during use. Never hold the cutter with one

hand during use.

• When working with the brushcutter always hold it with both

hands. Keep proper footing and balance at all times.

15 meters

3 meters

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BCX3400 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita BCX3400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info