Bedienungsanleitung Makita BFT121F (Seite 4 von 60) (Deutsch, Englisch, Polnisch)

598478

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

instructions and cautionary markings on (1)

battery charger, (2) battery, and (3) product

using battery.

3. CAUTION - To reduce risk of injury, charge

only MAKITA type rechargeable batteries.

Other types of batteries may burst causing

personal injury and damage.

4. Do not expose charger to rain or snow.

5. Use of an attachment not recommended or

sold by the battery charger manufacturer may

result in a risk of fire, electric shock, or injury

to persons.

6. To reduce risk of damage to electric plug and

cord, pull by plug rather than cord when

disconnecting charger.

7. Make sure cord is located so that it will not be

stepped on, tripped over, or otherwise

subjected to damage or stress.

8. Do not operate charger with damaged cord or

plug - replace them immediately.

9. Do not operate charger if it has received a

sharp blow, been dropped, or otherwise

damaged in any way; take it to a qualified

serviceman.

10. Do not disassemble charger or battery

cartridge; take it to a qualified serviceman

when service or repair is required. Incorrect

reassembly may result in a risk of electric

shock or fire.

11. To reduce risk of electric shock, unplug

charger from outlet before attempting any

maintenance or cleaning. Turning off controls

will not reduce this risk.

12. The battery charger is not intended for use by

young children or infirm persons without

supervision.

13. Young children should be supervised to

ensure that they do not play with the battery

charger.

14. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

15. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical

attention right away. It may result in loss of

your eyesight.

ADDITIONAL SAFETY RULES

FOR CHARGER & BATTERY

CARTRIDGE

1. Do not charge battery cartridge when

temperature is BELOW 10 ﾟ C (50 ﾟ F) or

ABOVE 40 ﾟ C (104 ﾟ F).

2. Do not attempt to use a step-up transformer,

an engine generator or DC power receptacle.

3. Do not allow anything to cover or clog the

charger vents.

4. Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a

container with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current

flow, overheating, possible burns and

even a breakdown.

5. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50 ﾟ C(122 ﾟ F).

6. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a fire.

7. Be careful not to drop, shake or strike battery.

8. Do not charge inside a box or container of any

kind. The battery must be placed in a well

ventilated area during charging.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before adjusting or

checking function on the tool.

Installing or removing battery cartridge

• Always switch off the tool before insertion or

removal of the battery cartridge.

• Do not use force when inserting the battery

cartridge. If the cartridge does not slide in easily, it

is not being inserted correctly.

For models BFT120(F)

Fig.1

• To remove the battery cartridge, withdraw it from

the tool while pressing the buttons on both sides of

the cartridge.

• To insert the battery cartridge, align the tongue on

the battery cartridge with the groove in the housing

and slip it into place. Always insert it all the way

until it locks in place with a little click. If not, it may

accidentally fall out of the tool, causing injury to

you or someone around you.

For model BFT121F

Fig.2

• To remove the battery cartridge, withdraw it from

the tool while sliding the button on the side of the

cartridge.

• To insert the battery cartridge, align the tongue on

the battery cartridge with the groove in the housing

and slip it into place. Always insert it all the way

until it locks in place with a little click. If you can

see the red part on the upper side of the button, it

is not locked completely. Insert it fully until the red

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BFT121F Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita BFT121F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info